DELL
DELL 1P7DP 2TB 3.5" SAS 7.2K 7200 RPM internal hard drive
A 2 TB 3.5-inch SAS drive spinning at 7200 RPM with a hot-swap tray for server storage
- InterfaceSerial Attached SCSI (SAS)
- Capacity2TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- 2 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- SAS interface connects directly to server controllers
- 5 inch form factor fits standard drive bays
- Hot-swap tray included enables drive changes without downtime
Dell 1P7DP 2 TB SAS drive
This is a new Dell 1P7DP 2 TB 3.5-inch internal hard drive with a SAS interface spinning at 7200 RPM. It ships with a hot-swap tray and uses SLC NAND flash memory for metadata operations.
Suited for SAS-equipped servers needing bulk
The drive fits servers and storage arrays that accept 3.5-inch SAS drives and can supply the required 6 Gb/s link. It is not for platforms that lack a SAS backplane or controller, nor for workloads requiring SSD latency or speeds beyond 7200 RPM.
SAS 6 Gb/s interface decides compatibility
The single specification that determines fit is the Serial Attached SCSI connection running at 6 Gb/s; the host must provide a matching SAS port and backplane for the drive to operate.
Puntos fuertes
- 2 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- SAS interface connects directly to server controllers
- 5 inch form factor fits standard drive bays
- Hot-swap tray included enables drive changes without downtime
Especificaciones
| Brand | Dell |
|---|---|
| Model | 1P7DP |
| Interface | Serial Attached SCSI (SAS) |
| Capacity | 2TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Preguntas sobre este artículo
Will the 3.5" form factor fit my server's hot-swap bay?
Yes, the drive is a 3.5" form factor and includes a hot-swap tray that slides directly into compatible SAS bays.
How do I install the SAS drive, and what step is often missed?
Insert the drive into the tray, lock the lever, then slide the assembly into the bay until the SAS connector seats firmly; the missed step is not pushing far enough to engage the backplane.
What maintenance will the 7200 RPM SAS drive need over time?
Monitor SMART attributes for reallocated sectors and run periodic surface scans; replace the drive if error counts rise or the SAS link drops to a lower speed.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
