Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Silver 3.5 inch SAS hard drive bare unit with hot-swap tray

DELL

DELL 342-2340 3TB 7200 RPM SAS 3.5" internal hard drive

SKU CH-MYTK-460ZQ MPN 342-2340

A 3.5" 3TB SAS hard drive spinning at 7200 RPM with a 12Gb/s transfer rate, built for server hot-swap bays

  • PackagingBare Drive
  • InterfaceSerial Attached SCSI
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Features3 TB 7200 RPM Near Line Serial Attached SCSI Hot Plug Hard D
  • 3 TB capacity stores large server datasets
  • 7200 RPM spindle delivers fast sequential access
  • SAS 6 Gb/s interface supports high-throughput workloads
  • 5-inch form factor fits standard drive bays
  • Hot-swap tray enables replacement without downtime

Capacity and interface

This is a Dell 342-2340 3TB 7200 RPM SAS 3.5" internal hard drive supplied as a bare drive. It uses a Serial Attached SCSI interface rated at 12Gb/s average latency and a 6Gb/s transfer rate. The 3.5-inch form factor fits standard server drive bays and the hot-swap tray design allows replacement without powering down the chassis.

Server storage suitability

The drive is built for nearline server workloads where consistent 7200 RPM performance and SAS connectivity are required. It suits administrators expanding capacity in compatible Dell PowerEdge or equivalent SAS-equipped arrays. It is not for systems without a SAS host bus adapter or backplane, nor for environments that demand solid-state latency or higher spindle speeds.

Deciding specification

The single specification that decides fit is the SAS interface combined with the 6Gb/s transfer rate; the host system must provide a matching SAS controller and backplane to recognise and use the drive.

Puntos fuertes

  • 3 TB capacity stores large server datasets
  • 7200 RPM spindle delivers fast sequential access
  • SAS 6 Gb/s interface supports high-throughput workloads
  • 5-inch form factor fits standard drive bays
  • Hot-swap tray enables replacement without downtime

Especificaciones

BrandDell
Model342-2340
PackagingBare Drive
InterfaceSerial Attached SCSI
Capacity3TB
RPM7200 RPM
Average Latency12Gb/s
Features3 TB 7200 RPM Near Line Serial Attached SCSI Hot Plug Hard Drive. Increase the storage capacity of your system with the 3 TB Hard Drive from Dell. Offering a rotational speed of 7200 RPM, this drive provides fast disk access. Featuring SAS interface, this hard drive delivers enhanced data transfer speed. This product has been tested and validated on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system.
UsageIdeal for Servers
Form Factor3.5"
Peso de envío0.91 kg
Dimensiones del paquete203 × 102 × 51 mm

Preguntas sobre este artículo

What type of controller or backplane does the 342-2340 need to operate?

The 342-2340 requires a SAS backplane or host bus adapter that supports 6 Gb/s SAS for the drive to be recognised and function.

Will the 342-2340 work in a system that only has 3 Gb/s SAS ports?

Yes, the 342-2340 is backwards compatible with 3 Gb/s SAS infrastructure; it will operate at the lower 3 Gb/s link speed.

How can I confirm the 342-2340 is running at its full 7200 RPM after installation?

Check the drive’s reported rotational speed in the RAID controller BIOS or operating system disk utility; it should show 7200 RPM.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.