DELL
DELL 962FP 1.92TB SATA 2.5 enterprise SSD
A 1.92 TB SATA 2.5-inch enterprise SSD built for read-intensive workloads in Dell PowerEdge servers
- InterfaceSATA
- 92 TB capacity for large data sets
- SATA 6 Gbps interface for broad server compatibility
- Read-intensive TLC design for endurance in read-heavy workloads
- 5 inch form factor fits standard drive bays
- Validated across Dell PowerEdge R640, R740, R750 and more
1.92TB SATA enterprise SSD for Dell PowerEdge
This 1.92TB 2.5-inch solid-state drive uses a SATA 6Gbps interface and read-intensive TLC NAND. It is built for Dell PowerEdge servers such as the R640, R740, R750, R650 and T550 where high-capacity, cost-effective storage is needed for read-heavy workloads.
SATA 6Gbps throughput ceiling
The SATA interface caps sequential throughput at 6Gbps, so sustained transfer rates cannot exceed this limit. Write endurance is tuned for read-intensive use, meaning heavy mixed or write-heavy workloads will wear the drive faster than mixed-use or write-intensive models.
Standard 2.5-inch hot-plug installation
The drive fits 2.5-inch hot-plug bays in compatible PowerEdge chassis and requires no extra cabling beyond the backplane. Firmware should be updated to the latest Dell revision before deployment; mismatched firmware is the most common cause of detection errors or RAID controller warnings.
Puntos fuertes
- 92 TB capacity for large data sets
- SATA 6 Gbps interface for broad server compatibility
- Read-intensive TLC design for endurance in read-heavy workloads
- 5 inch form factor fits standard drive bays
- Validated across Dell PowerEdge R640, R740, R750 and more
Especificaciones
| Brand | Dell |
|---|---|
| Model | 962FP, HFS1T9G3H2X069N |
| Interface | SATA |
Preguntas sobre este artículo
Should I choose the 1.92 TB capacity for read-intensive workloads?
The 1.92 TB model is built for read-intensive tasks such as boot, logging and web serving where write volume stays low.
How does the 6 Gbps SATA link perform inside a PowerEdge server?
The drive runs at the full 6 Gbps SATA rate, delivering sequential reads up to the interface limit while the controller handles queue depth.
Which Dell PowerEdge models accept this 2.5 inch SATA SSD?
It fits 2.5 inch bays across the R240 through R960, T150 through T640, C6420 through C6625, MX740C through MX840C and XR series servers.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
