DELL
DELL HY1F8 960GB SATA 2.5 enterprise SSD
A 960 GB SATA 2.5 inch enterprise SSD built for mixed-use workloads in compatible Dell PowerEdge servers
- InterfaceSATA
- 960 GB capacity supports large enterprise workloads
- SATA 6 Gbps interface fits standard server backplanes
- Mixed-use TLC design balances read and write endurance
- 512e sector format works with legacy and modern OSes
- Validated across Dell PowerEdge R630 through R760 platforms
Dell HY1F8 960GB SATA SSD
This 960GB enterprise SSD uses a SATA 6Gbps interface and mixed-use TLC flash with 512e formatting. It is built for Dell PowerEdge servers that need reliable read-write endurance in a 2.5-inch bay. The drive suits database, virtualization and logging workloads where consistent latency matters.
Installation in supported PowerEdge models
The drive fits standard 2.5-inch hot-plug bays in the listed PowerEdge rack, tower and modular servers. Firmware is updated before dispatch so the drive reports correctly to the controller. Installation fails if the backplane or controller does not present a SATA link at 6Gbps.
SATA 6Gbps interface limits
The SATA 6Gbps link caps sequential throughput at roughly 5200Mbps regardless of flash speed. Mixed-use TLC endurance is lower than write-intensive SLC alternatives so very heavy write workloads will wear the drive faster. The 512e sector emulation adds a small overhead for 4K-native operating systems.
Puntos fuertes
- 960 GB capacity supports large enterprise workloads
- SATA 6 Gbps interface fits standard server backplanes
- Mixed-use TLC design balances read and write endurance
- 512e sector format works with legacy and modern OSes
- Validated across Dell PowerEdge R630 through R760 platforms
Especificaciones
| Brand | Dell |
|---|---|
| Model | HY1F8, MTFDDAK960TDN-1AT1ZABDA |
| Interface | SATA |
Preguntas sobre este artículo
How can I verify the Dell HY1F8 960GB SATA 2.5 enterprise SSD is operating correctly after installation?
The drive appears in the server BIOS and Dell iDRAC with the correct 960GB capacity and SATA 6Gbps link speed. Run the built-in diagnostics or Dell OpenManage to confirm firmware version and SMART health status show no errors.
What is included with the Dell HY1F8 960GB SATA 2.5 enterprise SSD and what must be purchased separately?
The package contains the 2.5-inch SSD only. A 2.5-inch drive carrier or caddy compatible with your specific PowerEdge model, plus any required mounting screws, must be sourced separately if not already present in the chassis.
Which Dell HY1F8 960GB SATA 2.5 enterprise SSD version should I choose for my PowerEdge server?
Select the HY1F8 model (MTFDDAK960TDN-1AT1ZABDA) with 960GB capacity, 512e sector format and mixed-use TLC. Confirm your server appears in the supported list such as R640, R740, R750, MX750C or T640 before ordering.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
