Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Silver rack server 8 large drive bays front bezel 36 by 24 by 10 inches

DELL

DELL PowerEdge R740 8LFF 2x Xeon 6130 64GB DDR4 No Drive

SKU CH-V2ZV-TX7X4

Eight-bay 3.5-inch rack server with dual Xeon Silver 6130 CPUs, 64 GB DDR4 ECC and PERC H730P RAID controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size64GB
  • Dual Xeon 6130 CPUs deliver 16 cores each at 2.1GHz
  • 64GB DDR4 ECC registered memory supports demanding workloads
  • Eight 3.5-inch drive bays with PERC H730P RAID controller
  • 10GbE dual-port 562T adapter provides high-speed networking
  • iDRAC9 Enterprise licence enables full remote management

Dell PowerEdge R740 8LFF Server

This Dell PowerEdge R740 is a 2U rack-mount server system equipped with two Intel Xeon Silver 6130 processors running at 2.1GHz. It includes 64GB of DDR4 ECC registered memory and a PERC H730P RAID controller. The chassis provides eight 3.5-inch drive bays with a SATA interface and no drives are installed.

Suits dense storage and virtualisation workloads

The dual 16-core CPUs and 64GB RAM fit virtualisation hosts, database nodes or backup targets that need many large drives. The iDRAC9 Enterprise licence gives full remote management. Buyers who need more than two sockets or GPU compute capability should consider other platforms.

Eight 3.5-inch SATA bays decide fit

The server supports up to eight 3.5-inch drives on the PERC H730P controller using the SATA interface. Maximum memory capacity reaches 3TB across the available slots. Confirm that your workload fits the bay count and SATA protocol before ordering.

Puntos fuertes

  • Dual Xeon 6130 CPUs deliver 16 cores each at 2.1GHz
  • 64GB DDR4 ECC registered memory supports demanding workloads
  • Eight 3.5-inch drive bays with PERC H730P RAID controller
  • 10GbE dual-port 562T adapter provides high-speed networking
  • iDRAC9 Enterprise licence enables full remote management

Especificaciones

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)4,00
Storage ControllerDell PERC H730P Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC9 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Preguntas sobre este artículo

Do I need to supply my own 3.5" SATA drives for the eight drive bays?

Yes, the chassis has eight 3.5" bays and the PERC H730P controller uses SATA; no drives are installed.

Will the dual Xeon 6130 CPUs and 64 GB DDR4 ECC memory work with my existing DDR4 RDIMMs?

The system takes DDR4 ECC registered modules up to 3 TB total; match speed and rank to the installed 64 GB for best compatibility.

How can I confirm the PERC H730P RAID controller and iDRAC9 Enterprise are operating after first boot?

Enter the controller BIOS during POST to see the H730P detected, then open the iDRAC web interface — the Enterprise licence should show as active.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.