Fractal Design
Fractal Design FD-A-USBC-001 USB-C 10Gbps 67cm case accessory
Adds 10 Gbps USB-C front-panel access to compatible cases with a 67 cm internal cable
- TypesFront / Back Panel & Accessories
- Length67cm
- SpecificationsCompatibility: Pop series and compatible Fractal Design case
- FeaturesFast and easy USB-C upgrade for Pop series and compatible ca
- Add USB-C 10 Gbps to Pop cases with this 67 cm cable
- 20-pin Key-A internal header fits compatible Fractal Design front panels
- USB 3.1 Gen 2 delivers up to 10 Gbps transfer speed
- Plug-and-play upgrade adds modern USB-C without case modification
- 67 cm length routes cleanly from front panel to motherboard header
Fast USB-C upgrade for Pop cases
This 67 cm internal cable adds a front-panel USB-C port to Fractal Design Pop series cases and other compatible models. It uses a Key-A 20-pin motherboard header and supports USB 3.1 Gen 2 speeds up to 10 Gbps. The accessory is designed for builders who want modern Type-C connectivity without replacing their chassis. It suits new builds and upgrades where a single high-speed port is required.
Fits Pop series and compatible chassis
The cable connects a front-panel USB-C cutout to a Key-A 20-pin header on the motherboard. No additional adapters or controllers are needed when the board provides the matching header. Installation frees the builder from using slower Type-A ports or rear-panel connections for external drives and peripherals. It does not work with cases that lack the specific Pop-series front-panel layout or a compatible internal header.
Delivers 10 Gbps over a single port
The link handles external SSDs, docks and high-speed flash drives at full USB 3.1 Gen 2 bandwidth. One Type-C connector is provided, so setups requiring multiple simultaneous Type-C devices will need additional ports elsewhere. The 67 cm length reaches standard ATX and micro-ATX motherboard headers in mid-tower layouts. Builders needing more than one front Type-C connection or a different internal header type cannot use this cable alone.
Puntos fuertes
- Add USB-C 10 Gbps to Pop cases with this 67 cm cable
- 20-pin Key-A internal header fits compatible Fractal Design front panels
- USB 3.1 Gen 2 delivers up to 10 Gbps transfer speed
- Plug-and-play upgrade adds modern USB-C without case modification
- 67 cm length routes cleanly from front panel to motherboard header
Especificaciones
| Brand | Fractal Design |
|---|---|
| Model | FD-A-USBC-001 |
| Types | Front / Back Panel & Accessories |
| Length | 67cm |
| Specifications | Compatibility: Pop series and compatible Fractal Design cases USB specification: USB 3.1 Gen 2 (10 Gbps) External connector: USB Type-C Internal connector: Key-A 20-pin |
| Features | Fast and easy USB-C upgrade for Pop series and compatible cases USB 3.1 Gen 2 Type-C up to 10 Gpbs |
| Peso de envío | 0.05 kg |
| Dimensiones del paquete | 213 × 45 × 32 mm |
Preguntas sobre este artículo
Does the 10 Gbps rating hold up during long file transfers?
The cable is specified for USB 3.1 Gen 2 at 10 Gbps; sustained throughput will depend on the host controller and storage device.
Does the 67 cm cable add noticeable heat or noise inside the case?
It is a passive cable with no active components, so it produces no noise and negligible heat.
Which motherboard header is required for the internal 20-pin Key-A connector?
The cable needs a USB 3.1 Gen 2 front-panel header with a 20-pin Key-A layout on the motherboard.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001049BTC
En stock