Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Black fully modular ATX power supply 150 mm long with 135 mm fan

FSP

FSP HTI-1000M 1000W ATX 3.1 Titanium power supply

SKU CH-MMZH-ERD5W MPN HTI-1000M

A 1000W ATX 3.1 power supply with 80 Plus Titanium efficiency, fully modular cables and a 135mm FDB fan rated Cybenetics Lambda A++ for quiet operation

  • ColorBlack
  • TypeATX 3.1 Compatible
  • Maximum Power1000 W
  • Fans1 x 140 mm
  • PFCActive
  • Main Connector24+8Pin
  • Delivers 1000W continuous power for demanding builds
  • 80 Plus Titanium certification achieves 94% efficiency at 50% load
  • Fully modular cabling reduces clutter and improves airflow
  • Cybenetics Lambda A++ rating ensures exceptionally quiet operation
  • Compact 150mm length fits a wide range of cases

ATX 3.1 Titanium 1000W power supply

The FSP HTI-1000M delivers 1000 W of continuous power in an ATX 3.1 compatible form factor. It targets builders who need high efficiency and full modularity for modern graphics cards and CPUs. The unit carries 80 Plus Titanium certification and a Cybenetics Lambda A++ noise rating.

PCIe 5.1 12V-2x6 connector support

The power supply includes a native 12V-2x6 connector rated for PCIe 5.1 power excursions. ATX 3.1 allows transient spikes well above the nominal 1000 W rating, so the platform must handle short bursts without shutdown. Cable length and routing remain the installer's responsibility.

Replaces older ATX 2.x or non-modular units

Upgrading from an ATX 2.x design removes the need for adapter cables and adds the 12V-2x6 interface required by current GPUs. The jump is worth it when the existing unit lacks native PCIe 5.1 support or cannot sustain high transient loads. Fully modular cabling also reduces clutter compared with fixed-cable models.

Puntos fuertes

  • Delivers 1000W continuous power for demanding builds
  • 80 Plus Titanium certification achieves 94% efficiency at 50% load
  • Fully modular cabling reduces clutter and improves airflow
  • Cybenetics Lambda A++ rating ensures exceptionally quiet operation
  • Compact 150mm length fits a wide range of cases

Especificaciones

BrandFSP Group
Series80 Plus
Model1000W
Part NumberPPA10A3808
ColorBlack
TypeATX 3.1 Compatible
Maximum Power1000 W
Fans1 x 140 mm
PFCActive
Main Connector24+8Pin
+12V RailsYes
PCI-Express Connector1 x 6+2-Pin
Max PSU Length250 mm
ModularYes
Power Good Signal100-500ms
Efficiency> 79%
Energy-Efficient80 PLUS Certified
PSU Noise LevelCybenetics A++
Over Voltage ProtectionYes
Overload ProtectionYes
Input Voltage100 - 120 V / 200 - 240 V
Input Frequency Range50/60 Hz

Preguntas sobre este artículo

Should I pick the 1000W unit or look for a higher wattage model?

The only model listed is the 1000W unit rated at 1000W total power with 83.33A on the +12V rail, so choose this capacity if your build needs up to 1000W.

What does the 1000W rating deliver inside a real PC?

It supplies up to 1000W total with 83.33A on the +12V rail, 20A on +3.3V and +5V combined to 120W, 0.3A on -12V and 3A on +5Vsb, all at 94% typical efficiency.

How does the ATX 3.1 and PCIe 5.1 interface limit power spikes?

The PSU meets ATX 3.1 and PCIe 5.1 excursion requirements and includes a 12VHPWR connector, so it handles the transient spikes those standards define for modern GPUs.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.