HPE DL360 Gen9 4LFF 2x Xeon E5-2690 v4 256GB DDR4 rack server

Enterprise rack server for dense compute

The HPE DL360 Gen9 4LFF chassis arrives with two Xeon E5-2690 v4 processors running at 2.6GHz, each delivering 14 cores and 35MB cache. 256GB of DDR4 ECC registered memory is installed across the DIMM slots, leaving headroom up to the 768GB maximum. The 4LFF bay layout accepts 3.5-inch SATA drives behind a P440 SAS controller, while dual 10GbE and dual 1GbE ports handle network traffic. Integrated graphics and iLO Advanced remote management complete the baseline configuration.

Tool-less rails and hot-plug components simplify

The 2U form factor mounts in standard racks using the optional rail kit, and both 500W Flex Slot power supplies slide in from the rear without cabling. Memory population follows the documented channel sequence; misordered DIMMs are the most common cause of POST failures. Drive carriers latch securely, but the P440 firmware must match the backplane revision to avoid array visibility issues. iLO network settings default to DHCP, so a static reservation should be configured before the first reboot.

Sustained workloads stay within thermal limits

Dual 500W supplies share load evenly, and the fan wall ramps gradually under continuous CPU utilisation rather than spiking. The 256GB DDR4 configuration distributes evenly across all channels, preserving memory bandwidth during long render or database jobs. P440 write-back cache is backed by a capacitor pack, protecting array integrity during unexpected power events. iLO telemetry logs inlet temperature and power draw continuously, allowing trend analysis without external monitoring agents.