Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Silver rack-mount server chassis with eight 2.5-inch drive bays visible on the front panel

HPE

HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2690 v4 768GB DDR4

SKU CH-QA5G-3XKKW

Rack server with two 14-core Xeon processors at 2.6 GHz, 768 GB DDR4 ECC memory, P440 SAS RAID controller, and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon E5-2690 v4 processors provide 14 cores each at 2.6GHz for heavy workloads
  • 768GB DDR4 ECC memory supports large datasets and virtualisation density
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage configurations
  • Dual 500W power supplies and iLO remote management maintain uptime and simplify administration
  • Integrated 10GbE and 1GbE network ports deliver high-throughput connectivity out of the box

Dual Xeon E5-2690 v4 server

The HPE ProLiant DL380 Gen9 is a 2U rack-mount server equipped with two 14-core Intel Xeon E5-2690 v4 processors running at 2.6GHz. It ships with 768GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller. The 8SFF chassis supports up to eight 2.5-inch SATA drives, making it suitable for virtualisation hosts or database workloads that demand high core counts and large memory capacity.

Sustained load behaviour

Dual 500W Flex Slot power supplies provide redundancy for continuous operation. The P440 controller manages RAID arrays without a listed cache module, so write throughput depends on the drives installed. Integrated Intel I350 and X540 network adapters deliver two 10GbE and two 1GbE ports for steady data movement. HPE iLO Advanced remote management allows monitoring and firmware updates without physical access during extended production runs.

Installation notes

The unit weighs 40 units and measures 36 x 24 x 10 inches, so rack rails and adequate depth are required. No drives are included; buyers must source compatible 2.5-inch SATA SSDs or HDDs separately. Memory slots are fully populated at 768GB, leaving no room for expansion without removing existing modules. The system arrives with BIOS and firmware updated, but drive carrier installation and RAID configuration remain the installer's responsibility.

Puntos fuertes

  • Dual Xeon E5-2690 v4 processors provide 14 cores each at 2.6GHz for heavy workloads
  • 768GB DDR4 ECC memory supports large datasets and virtualisation density
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage configurations
  • Dual 500W power supplies and iLO remote management maintain uptime and simplify administration
  • Integrated 10GbE and 1GbE network ports deliver high-throughput connectivity out of the box

Especificaciones

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)1.920,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Preguntas sobre este artículo

How much power do the two 500 W supplies draw when the dual 14-core Xeon E5-2690 v4 CPUs run at 2.6 GHz all day?

Each supply is rated at 500 W; the pair provides redundancy so the system stays on if one fails.

Which drive interface must my own 2.5-inch drives use to connect to the P440 controller?

The controller supports SAS and SATA, so any 2.5-inch SAS or SATA drive will work.

Can I keep my existing DDR4 ECC registered modules and add them to the 768 GB already installed?

Yes, the board accepts DDR4 ECC registered DIMMs up to a total of 3 TB, so additional modules of the same type are compatible.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.