Intel
Intel DC S3700 800 GB 2.5" SATA internal SSD
An 800 GB 2.5-inch SATA internal SSD delivering 500 MB/s read and 460 MB/s write speeds for I/O-intensive data-center workloads
- Device TypeInternal / External Solid State Drive (SSD)
- Feeds I/O-starved applications with 500 MB/s maximum read speed
- Delivers extended endurance at 460 MB/s maximum write speed
- Fits standard 2.5" bays with 0.3" height profile
- Connects via SATA 600 interface for broad compatibility
- Provides 800 GB capacity for data-centre workloads
DC S3700 800 GB SATA SSD
This Intel DC S3700 solid state drive provides 800 GB of storage for internal use. It connects through a SATA 600 interface in a standard 2.5 inch form factor. The drive targets I/O intensive applications that need consistent performance and high endurance.
Sustained performance and endurance
Sequential reads reach 500 MB/s and writes reach 460 MB/s across the SATA 600 link. The DC S3700 series is built for extended endurance and consistently low latency under continuous load. Strong data protection features help maintain integrity during heavy write cycles.
Compatibility checks before ordering
Verify your system has a free 2.5 inch drive bay with at least 0.3 inch vertical clearance. Confirm the motherboard or controller provides a SATA 600 port for full bandwidth. Ensure the chassis can accommodate the 2.8 inch width and 3.9 inch depth of the drive.
Puntos fuertes
- Feeds I/O-starved applications with 500 MB/s maximum read speed
- Delivers extended endurance at 460 MB/s maximum write speed
- Fits standard 2.5" bays with 0.3" height profile
- Connects via SATA 600 interface for broad compatibility
- Provides 800 GB capacity for data-centre workloads
Especificaciones
| Brand | Intel |
|---|---|
| Device Type | Internal / External Solid State Drive (SSD) |
Preguntas sobre este artículo
Will the 2.5" form factor and 0.3" height fit my server drive bay?
The drive uses the standard 2.5" form factor with a 0.3" height, matching common hot-swap trays and fixed bays in 1U and 2U servers.
Does the SATA 600 interface work with my existing RAID controller?
Yes, the SATA 600 interface is backward compatible with SATA 300 and SATA 150 controllers, so it will negotiate the highest speed both ends support.
What sustained write speed can I expect for database workloads?
The maximum write transfer rate is 460 MB/s, and the DC S3700 series is designed for consistent low latency under heavy mixed I/O.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
