Lian Li RB 750W power supply, 80 Plus Bronze, ATX 3.1, PCIe 5.1, 135mm fan, non-modular, black
- Black
- ATX (ATX 3.1 Compat…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Lian Li
Delivers 550 W through an ATX 3.1 design with 80 PLUS Bronze efficiency, a 135 mm low-noise fan, and built-in cable routing for a tidy build
The Lian Li RB 550W is a non-modular ATX 3.1 power supply rated for 550 W continuous output. It carries 80 PLUS Bronze certification with up to 85% efficiency and active PFC above 0.95. A single +12 V rail and DC-to-DC topology provide stable voltage regulation for gaming or creator systems.
Builders who want native PCIe 5.1 12+4 pin support and integrated cable routing channels with Velcro straps will benefit. Buyers who need fully modular cabling or higher wattage for multi-GPU configurations should look elsewhere.
The unit meets the Intel ATX 3.1 specification and includes a native 12+4 pin connector for modern graphics cards. A 135 mm hydraulic-bearing fan handles cooling, while protections cover OPP, OVP, SCP, OCP, UVP and OTP.
| Brand | LIAN LI |
|---|---|
| Series | RB series |
| Color | Black |
| Type | ATX (ATX 3.1 Compatible) |
| Maximum Power | 550 W |
| Fans | 1 x 135 mm HYB Fan |
| PFC | Active PFC, PF > 0.95 under full load @ 115Vac, 60Hz |
| Main Connector | 20+4Pin |
| Modular | Non Modular |
| Energy-Efficient | 80 PLUS BRONZE Certified |
| Protection | OPP/OVP/SCP/OCP/UVP/OTP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 8A, 50-60Hz |
| MTBF | >100,000 Hours |
| Approvals | CE/CB/cTUVus/TÜV/FCC/BSMI/CCC/KCC/SAA+RCM |
| Connectors | Main Power (20+4Pin)600mm * 1pc ATX 12V (4+4Pin) EPS 4+4pin 650mm * 2pc PCIe 6+2 600+150mm * 1pc SATA (5Pin) / Peripheral (4Pin) SATA 400+150+150mm + PATA 150mm *1pc |
| Dimensions | 150mm(W)x86mm(H)x150mm(D) |
| Weight | 5 lbs |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The fixed 20+4 pin cable is 600 mm long and each 4+4 pin EPS cable is 650 mm, so they reach standard ATX motherboard positions in most older cases.
The 135 mm hydraulic-bearing fan spins at low speed under typical loads; listen for a gentle airflow sound and check that the fan blade is turning through the rear grille.
The unit ships with a fixed 20+4 pin main cable, two 4+4 pin EPS cables, one 6+2 pin PCIe cable, and a combined SATA/peripheral cable; no modular cables are included and no separate cables are required for a standard build.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?