Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
LORDWORLD 2.66inch three-color e-paper raw display 296 by 152 pixels

LORDWORLD

LORDWORLD 2.66inch E-Paper (B) 296×152 Three-Color Raw Display

SKU CH-MWSN-9H6VZ

A 2.66 inch three-colour e-paper raw display with 296 by 152 pixels, SPI interface and ultra-low power consumption

  • Retains image without power thanks to no backlight
  • Ultra-low consumption draws energy only during refresh
  • 66 inch three-colour e-ink shows red black white
  • 296 by 152 pixel resolution for sharp detail

Compact 2.66-inch raw e-paper for IoT prototypes

This 2.66-inch raw display panel delivers a 296 by 152 pixel resolution with three-colour red, black and white output. It connects through an SPI interface and ships without a driver PCB, making it suited for developers integrating custom driving logic into low-power IoT edge devices.

Passive display with near-zero static draw

The panel has no backlight and retains the last image indefinitely after power is removed. Power is consumed only during refresh cycles, so normal operation adds negligible heat and no audible noise to the host device.

Puntos fuertes

  • Retains image without power thanks to no backlight
  • Ultra-low consumption draws energy only during refresh
  • 66 inch three-colour e-ink shows red black white
  • 296 by 152 pixel resolution for sharp detail

Especificaciones

BrandLORDWORLD

Preguntas sobre este artículo

How do I connect the SPI interface on this 2.66inch E-Paper display?

Connect the SPI pins on the flexible tail directly to your microcontroller using a compatible ZIF connector or solder the pads; the display operates without a PCB so wiring must match the raw panel pinout.

Will the three-colour red, black and white image fade if the display loses power?

No, the panel retains the last refreshed image indefinitely without power because it has no backlight and only draws current during a refresh cycle.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.