Maxtor Thermal
Maxtor Thermal 8301C Thermal Paste 12 W/mK 300g
- 300g
- 12 W/mK
53,99 US$
0.000691BTC
En stock
Maxtor Thermal
Maxtor Thermal 8301C Thermal Paste 12 W/mK 150g
High-performance thermal compound with 12 W/mK conductivity in a 150g can for CPU, GPU and console cooling
- Volume / Net Weight150g
- Thermal Conductivity12 W/mK
- Long Term Operating Temperature-50 to 260 C
Weight 150 g
- 150 g
- 300 g
- 12 W/mK conductivity pulls heat from CPU and GPU fast
- 150 g tub covers many builds and reapplications
- Stable from -50 °C to 260 °C for extreme environments
- Works on PC, PS4, MCU and 5G gear
- Canned format costs about 50 % less per gram than syringes
Maxtor Thermal 8301C 150g Thermal Paste
Maxtor Thermal 8301C is a 150g thermal compound with 12 W/mK conductivity. It is designed for CPU, GPU, console and general electronics cooling. The paste suits builders and technicians who need a large-volume supply for multiple applications. It operates reliably across a -50 to 260 °C range.
Suits multi-device maintenance.
This container suits workshops, server rooms or enthusiasts servicing many systems where 150g lowers the cost per application by roughly 50 percent versus syringe packs. Buyers who only need a single CPU install and prefer a pre-filled syringe for easier dispensing should look at smaller formats instead. The wide temperature range supports demanding environments.
12 W/mK conductivity drives the cooling result
The 12 W/mK thermal conductivity rating is the single figure that determines whether this paste meets your heat-transfer requirement. Higher conductivity moves heat from the die to the heatsink more efficiently, keeping components stable under load. If your design targets a lower conductivity spec, this product exceeds it; if you require a higher rating, this paste will not satisfy that need.
Puntos fuertes
- 12 W/mK conductivity pulls heat from CPU and GPU fast
- 150 g tub covers many builds and reapplications
- Stable from -50 °C to 260 °C for extreme environments
- Works on PC, PS4, MCU and 5G gear
- Canned format costs about 50 % less per gram than syringes
Especificaciones
| Brand | Maxtor |
|---|---|
| Series | 8301 |
| Model | C |
| Part Number | Canned thermal paste has a unit price about 50% lower than syringe packaging, and is more recommended for large consumer groups such as physical stores, server fields, power battery fields, aerospace fields, etc. |
| Volume / Net Weight | 150g |
| Thermal Conductivity | 12 W/mK |
| Long Term Operating Temperature | -50 to 260 C |
Otras versiones de este modelo
1 más en esta gama
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Preguntas sobre este artículo
How do I apply the 150 g canned paste to a CPU, and what step do people often miss?
Spread a thin, even layer across the entire integrated heat spreader using a plastic card; the step many skip is cleaning old compound off both surfaces with isopropyl alcohol first.
When will the 12 W/mK compound need replacing in a continuously running server?
The paste is rated for long-term operation from -50 °C to 260 °C; under sustained load it typically remains effective for several years before drying out and requiring re-application.
What thermal limit appears first if the GPU runs at full load for hours with this paste?
The 12 W/mK conductivity ceiling is reached before the 260 °C operating maximum, so the interface itself becomes the bottleneck while the paste stays within its temperature rating.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001049BTC
En stock