NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
myVolts
TFX 400W replacement PSU fits Dell Studio Slim 540s, 537s and 560s SFF, upgrading from 200, 250, 300 or 350W with 20+4 pin, 4-pin CPU, 2× Molex, floppy and 2× SATA connectors
This 400W TFX power supply replaces the original unit in Dell Studio Slim 540s, 537s and 560s small-form-factor desktops. It delivers 400 watts of steady output and upgrades systems that shipped with 200, 250, 300 or 350 watt units. The AT-type design fits the proprietary TFX chassis used by these models. Builders restoring or upgrading a compatible Dell SFF will find a direct mechanical and electrical match.
An 80mm fan with double ball bearings handles airflow through the compact housing. The bearing choice reduces wear compared with sleeve types, helping the fan run consistently over long periods. Input voltage spans 100 to 240 volts, so the unit accepts worldwide mains without a switch. Normal operation stays within the 400 watt rating while the fan manages thermals in the tight SFF enclosure.
The supply replaces factory units rated at 200, 250, 300 or 350 watts, adding headroom for extra drives or a modest graphics card. Connectors include a 20+4 pin motherboard plug, a 4-pin CPU plug, two Molex, a floppy connector and two SATA plugs. Systems needing more than 420 watts peak or additional PCIe power cables are not served by this model.
| Type | AT |
|---|
Fit the TFX unit into the Slim chassis, secure it with the rear screws, then attach the 20+4 pin motherboard plug, the 4-pin CPU plug, two Molex, the floppy lead and both SATA connectors — the 4-pin CPU plug is the one most often forgotten.
The 80mm double-ball-bearing fan is the only moving part; clean dust from its intake every few months and replace the fan if bearing noise appears.
The 400W continuous output ceiling is reached before any other limit; the 80mm fan must move enough air to keep internal temperatures stable at that wattage.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?