BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278589BTC
En stock
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 2400 CL17 ECC RDIMM Dell PowerEdge FC430 memory upgrade
128 GB DDR4 ECC registered server kit with four 32 GB modules at 2400 MHz CL17 for Dell PowerEdge FC430
- Capacity128GB (4 x 32GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128GB total capacity from four 32GB modules
- ECC registered design protects data integrity in servers
- DDR4 2400 CL17 timing balances speed and latency
- 2V operation reduces power draw per module
- 288-pin RDIMM form factor fits Dell PowerEdge FC430
Dell PowerEdge FC430 memory kit
This 128GB kit contains four 32GB DDR4 ECC RDIMM modules built for the Dell PowerEdge FC430 server. Registered buffering and error correction protect data integrity in virtualised workloads and database services. The dual-rank 2Rx4 organisation suits the platform’s memory controller. Buyers needing higher capacities per slot or non-ECC memory for desktop boards cannot use this kit.
Sustained load behaviour
Rated at DDR4 2400 with CL17 latency, the modules maintain stable throughput during long compute runs and heavy virtualisation duty. ECC detection corrects single-bit errors without halting the system. Registered signalling reduces electrical load on the memory bus at full population. Workloads demanding DDR4 2666 or higher transfer rates will run at the lower 2400 speed.
Thermals noise and power
Operating at 1.20V, the bare modules draw modest power and produce minimal heat inside the server chassis. No heat spreaders are fitted; cooling relies on the system’s directed airflow. Silent operation is inherited from the host fans. Builds requiring active module cooling or lower-voltage 1.1V operation must look elsewhere.
Puntos fuertes
- 128GB total capacity from four 32GB modules
- ECC registered design protects data integrity in servers
- DDR4 2400 CL17 timing balances speed and latency
- 2V operation reduces power draw per module
- 288-pin RDIMM form factor fits Dell PowerEdge FC430
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR19200-324K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 2400MHZ PC4-19200 2Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT |
Preguntas sobre este artículo
Does the 1.2 V DDR4 2400 kit add noticeable heat or power draw when the FC430 runs 24/7?
Each 32 GB RDIMM operates at the standard 1.20 V DDR4 voltage, so the four-module kit draws no more power than the server's stock memory and produces only typical DDR4 thermals under continuous load.
What must the Dell PowerEdge FC430 already have to accept this 288-pin registered ECC kit?
The FC430 needs free DDR4 RDIMM slots and a BIOS that supports registered ECC modules; the kit plugs directly into the server's standard 288-pin memory sockets.
Can the CL17 2400 MHz modules run alongside any older 2666 MHz sticks still in the FC430?
The server will clock all installed memory to the lowest common speed, so mixing these 2400 MHz RDIMMs with 2666 MHz modules forces the faster sticks down to 2400 MHz.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00281181BTC
En stock
