Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 1.2V SODIMM SuperMicro memory upgrade

SKU CH-745C-QVF4N

A 16 GB DDR4 SODIMM running at 2666 MHz with CL19 latency for Supermicro systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands server memory headroom
  • DDR4 2666 MT/s speed matches platform spec
  • CL19 latency supports stable operation
  • 2 V low voltage reduces power draw
  • 260-pin SODIMM form factor fits Supermicro slots

SuperMicro DDR4 2666 SODIMM

This 16GB DDR4 2666 SODIMM is built for SuperMicro servers and workstations that require non-ECC unbuffered memory. It suits IT professionals upgrading compatible 260-pin platforms where registered or ECC modules are not supported.

1.20V operation without heat spreader

The module runs at the standard 1.20V DDR4 voltage with a CL19 latency and 2Rx8 organisation. No heat spreader is fitted, so airflow within the chassis handles thermal dissipation during typical workloads.

Single 16GB module in the package

The box contains one 16GB stick (1X16GB) ready for installation. No additional brackets, software or cables are included; the upgrade relies on the system's own memory slots and BIOS recognition.

Puntos fuertes

  • 16 GB capacity expands server memory headroom
  • DDR4 2666 MT/s speed matches platform spec
  • CL19 latency supports stable operation
  • 2 V low voltage reduces power draw
  • 260-pin SODIMM form factor fits Supermicro slots

Especificaciones

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Preguntas sobre este artículo

How do I install the 260-pin SODIMM in my SuperMicro system and what step is often missed?

Align the notch on the module with the slot key, insert at an angle until the gold contacts are fully seated, then press down firmly until both side clips click — the click is the step people skip, leaving the module loose.

What maintenance or replacement will this 16GB DDR4 2666 CL19 module need later?

No routine maintenance is required; the module has no heat spreader and no moving parts. Replacement is only needed if a memory test reports errors or the system fails to POST after a firmware update.

What limit appears first under sustained load with this 1.2V 2Rx8 unbuffered SODIMM?

The CL19 latency at 2666 MT/s sets the throughput ceiling; sustained workloads will hit that timing bound before voltage or thermal limits become a factor.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.