NEMIX RAM
NEMIX RAM 16GB DDR4 2933MHz CL21 1.2V 288-Pin UDIMM memory upgrade
A 16 GB DDR4 2933 MHz CL21 1.2 V 288-pin UDIMM module validated for Supermicro desktop and workstation boards
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 2933 MHz CL21 expands system memory for heavier workloads
- 2 V low-voltage operation reduces power draw and heat output
- 288-pin UDIMM form factor installs directly into standard desktop DIMM slots
- Single-rank 1Rx8 layout simplifies memory-controller loading on compatible Supermicro boards
- Major-brand Samsung Micron or Hynix DRAM chips provide validated component quality
Compatibility & Use Case
This 16GB DDR4 2933MHz module is built for Supermicro desktop and workstation motherboards such as the MBD-C9X299-PGF. It suits users who need a single non-ECC unbuffered UDIMM to add capacity to a compatible system. Buyers whose platforms require registered or ECC memory cannot use this kit.
Pre-Installation Checks
Verify that your motherboard accepts 288-pin DDR4 UDIMMs running at 1.20V with a CL21 latency profile. Confirm the board supports 1Rx8 single-rank modules and does not mandate ECC or registered DIMMs. Consult the system manual for maximum supported capacity per slot and total memory limit before ordering.
Thermals, Noise & Power
The stick operates at the standard DDR4 voltage of 1.20V and carries no heat spreader, relying on case airflow for cooling. As a passive component it produces no audible noise. Power draw stays within the normal range for a 16GB DDR4 2933MHz UDIMM under typical workloads.
Puntos fuertes
- 16 GB DDR4 2933 MHz CL21 expands system memory for heavier workloads
- 2 V low-voltage operation reduces power draw and heat output
- 288-pin UDIMM form factor installs directly into standard desktop DIMM slots
- Single-rank 1Rx8 layout simplifies memory-controller loading on compatible Supermicro boards
- Major-brand Samsung Micron or Hynix DRAM chips provide validated component quality
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-618K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM |
Preguntas sobre este artículo
Does the 16GB DDR4 2933MHz CL21 UDIMM come as a single stick or do I need to buy a kit?
The module ships as one 16GB stick (1X16GB) so nothing else is required unless you want more capacity.
Should I pick the CL21 2933MHz version or a different speed for my Supermicro board?
This CL21 2933MHz (PC4-23400) part is validated for the SuperMicro MBD-C9X299-PGF motherboard; choose it when your board specifies that exact speed and latency.
What does the 2933MHz rating actually deliver once the UDIMM is installed?
The 2933MHz DDR4 module runs at 1.20V with CL21 timing, giving your compatible Supermicro system the rated PC4-23400 bandwidth without overclocking.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133377BTC
En stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.0001015BTC
En stock