BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278351BTC
En stock
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM for POSIFLEX RT-6015-G2 memory upgrade
16 GB DDR4 3200 SODIMM for POSIFLEX RT-6015-G2 terminals, CL22 2Rx8 unbuffered
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 MHz module boosts POS terminal responsiveness
- CL22 latency and 1.20 V operation keep power draw low
- 2Rx8 dual-rank organisation improves memory bandwidth
- 260-pin SODIMM form factor fits POSIFLEX RT-6015-G2 slot directly
- Tested with Samsung, Micron or Hynix chips for reliable operation
POSIFLEX RT-6015-G2 memory upgrade
This 16GB DDR4 3200 SODIMM is built for the POSIFLEX RT-6015-G2 terminal. It uses a 260-pin unbuffered non-ECC layout at 1.2V with CL22 timing. The module suits operators who need a single-stick capacity increase for point-of-sale workloads.
Check your terminal before ordering
Verify that the RT-6015-G2 has a free SODIMM slot and that the BIOS accepts 2Rx8 density at 3200 MT/s. The board must support 1.2V DDR4 non-ECC unbuffered modules. Confirm the maximum memory per slot allowed by the system documentation.
Sustained load behaviour
All modules are rigorously stress tested under load to ensure reliability during continuous operation. The 1.2V rating and CL22 latency provide stable throughput for long transaction queues. No heat spreader is fitted, so airflow in the chassis should be adequate for extended shifts.
Puntos fuertes
- 16 GB DDR4 3200 MHz module boosts POS terminal responsiveness
- CL22 latency and 1.20 V operation keep power draw low
- 2Rx8 dual-rank organisation improves memory bandwidth
- 260-pin SODIMM form factor fits POSIFLEX RT-6015-G2 slot directly
- Tested with Samsung, Micron or Hynix chips for reliable operation
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Preguntas sobre este artículo
Does the package include only the 16 GB DDR4 3200 SODIMM or are tools or cables also supplied?
The package contains one 16 GB DDR4 3200 CL22 260-pin SODIMM module and nothing else. No tools or cables are included.
Should I pick a different capacity or speed for the POSIFLEX RT-6015-G2 or is this 16 GB 3200 MHz module the right match?
This module is built to the exact specification for the POSIFLEX RT-6015-G2: 16 GB, DDR4 3200, CL22, 1.2 V, 2Rx8, non-ECC unbuffered.
Will the CL22 latency and 3200 MHz rating deliver the advertised bandwidth once installed in the terminal?
At CL22 and 3200 MHz the module runs at the standard PC4-25600 data rate, giving the full DDR4 3200 bandwidth the terminal expects.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
