Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-Pin UDIMM MSI B650M Project Zero memory upgrade

SKU CH-7TTM-J6TTM

16 GB DDR5-5600 CL46 1.1 V 288-pin UDIMM built for MSI B650M Project Zero boards

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 16GB

  • 16GB DDR5 module adds responsive capacity for demanding workloads
  • 5600 MT/s speed rating keeps data moving at PC5-44800 bandwidth
  • CL46 CAS latency delivers predictable timing for stable operation
  • 10V operating voltage reduces power draw and heat output
  • 288-pin UDIMM form factor fits MSI B650M Project Zero motherboards

16 GB DDR5 module for MSI B650M Project Zero

This 16 GB DDR5 5600 UDIMM is built to match the MSI B650M Project Zero motherboard. It targets desktop owners who want a straightforward capacity increase on a validated platform. The module is new, unbuffered and non-ECC, so it fits standard consumer DIMM slots without extra configuration.

Capacity and headroom at 5600 MT/s

A single 16 GB rank handles everyday multitasking, office suites and mainstream gaming at the rated 5600 MT/s speed. The CL46 latency and 1.1 V operation stay within JEDEC baseline limits, so the board runs it without manual tuning. Workloads that demand more than 16 GB or tighter timings will exceed what this stick can deliver.

Upgrade path from lower-capacity or slower DDR5

Replacing an 8 GB DDR5 module or a slower 4800 MT/s kit adds both capacity and bandwidth in one step. The jump is worthwhile when the system shows memory pressure in Task Manager or when the current kit forces the memory controller below 5600 MT/s. Builders needing ECC, registered buffers or speeds above 5600 MT/s should look elsewhere.

Puntos fuertes

  • 16GB DDR5 module adds responsive capacity for demanding workloads
  • 5600 MT/s speed rating keeps data moving at PC5-44800 bandwidth
  • CL46 CAS latency delivers predictable timing for stable operation
  • 10V operating voltage reduces power draw and heat output
  • 288-pin UDIMM form factor fits MSI B650M Project Zero motherboards

Especificaciones

BrandNEMIX RAM
SeriesMSI Gaming Motherboard Compatible Series Memory
ModelMSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMSI
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will this DDR5 5600 CL46 1.1 V UDIMM work in the same MSI B650M Project Zero board alongside older DDR5 modules I already own?

The module is validated for the MSI B650M Project Zero motherboard and runs at DDR5 5600 (PC5-44800) with CL46 timing at 1.1 V. Mixing kits can force the board to run all sticks at the slowest common speed and loosest latency, so full rated performance is not guaranteed with different modules installed.

How can I verify the stick is running at DDR5 5600 CL46 1.1 V after I install it?

Enter the system BIOS or use a tool such as CPU-Z to confirm the memory frequency reads 5600 MT/s, the CAS latency shows CL46 and the voltage is set to 1.1 V.

What comes in the package and do I need anything extra to install it?

The box contains one 16 GB 288-pin DDR5 UDIMM (part MD44800-618K1). No additional parts are required; the module installs directly into a compatible DDR5 DIMM slot on the motherboard.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.