Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM Supermicro H13DSH

SKU CH-YCPK-E75XG

A 1 TB DDR5 server memory kit with 16 registered ECC modules running at 4800 MHz and CL40 latency, validated for the Supermicro H13DSH motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

Ver 30 configuraciones más
  • 1TB capacity with 16 matched 64GB modules for full server population
  • DDR5 4800 speed and CL40 timing recognized at rated performance
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13DSH memory slots
  • 1V operation meets DDR5 standard voltage for stable enterprise workloads

Supermicro H13DSH 1TB DDR5 Kit

This 1 TB kit contains 16 modules of 64 GB each, built as 288-pin DDR5 RDIMMs rated at 4800 MT/s with CL40 latency and 1.10 V operation. Registered ECC architecture with 2Rx4 organisation lets the memory controller address every slot at full population without signal degradation.

Suited for fully populated H13DSH servers

Designed for administrators who need the maximum supported capacity on a Supermicro H13DSH motherboard and want a single part number that matches the board's population rules. Builders using unbuffered UDIMMs, SODIMM form factors, or non-ECC modules should look elsewhere because those types will not register on this platform.

Handles 1 TB at rated DDR5-4800

With all 16 slots filled, the kit delivers the full terabyte at the controller's native 4800 MT/s speed while ECC corrects single-bit errors in real time. Headroom ends at the board's documented maximum; configurations requiring higher frequencies, lower latencies, or capacities beyond the manual's limits cannot be satisfied by this kit.

Puntos fuertes

  • 1TB capacity with 16 matched 64GB modules for full server population
  • DDR5 4800 speed and CL40 timing recognized at rated performance
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13DSH memory slots
  • 1V operation meets DDR5 standard voltage for stable enterprise workloads

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does my Supermicro H13DSH motherboard need a specific BIOS version to recognise all sixteen 64 GB DDR5-4800 RDIMMs?

The kit is validated for the H13DSH; consult your motherboard manual for the exact BIOS revision and DIMM population order required to run the full 1 TB at 4800 MT/s.

Can I keep my existing DDR5 RDIMMs and add this sixteen-module kit alongside them?

Mixing ranks or capacities can prevent the memory controller from training at 4800 MT/s; for stable operation populate all slots with identical 2Rx4 64 GB modules from this kit.

How do I confirm the system is running the full 1 TB at DDR5-4800 CL40 with ECC active?

Check the BIOS memory summary or use dmidecode / lshw to verify 16 × 64 GB detected, 4800 MT/s speed, CL40 latency, 1.1 V, and ECC enabled.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.