SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00497153BTC
En stock
NEMIX RAM
NEMIX RAM 1TB 8x128GB DDR5 6400 CL52 1.1V 2Rx4 RDIMM ECC memory upgrade for Supermicro H13SST-G
Eight 128 GB DDR5 registered ECC RDIMMs at 6400 MT/s CL52 1.1 V, validated for the Supermicro H13SST-G motherboard
- Capacity1TB (8 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity with eight 128GB modules for maximum density
- DDR5 6400 speed with CL52 latency at 1.1V for rated performance
- Registered ECC architecture prevents silent data corruption under load
- 2Rx4 dual-rank organisation matches controller expectations for full population
- 288-pin RDIMM form factor verified for Supermicro H13SST-G motherboard
Exact-match DDR5 kit for Supermicro H13SST-G
This 1 TB kit contains eight 128 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation. The modules are registered, ECC-enabled and built with a 2Rx4 organisation using major OEM DRAM. They are intended for administrators upgrading the Supermicro H13SST-G motherboard to its full supported capacity.
Verify motherboard population rules before ordering
Consult the Supermicro H13SST-G manual for approved DIMM population order, maximum capacity per channel and any BIOS version requirements. The board requires 288-pin registered RDIMMs; unbuffered or SO-DIMM modules will not function. Confirm that your current configuration can accept eight dual-rank modules without exceeding the memory controller limits.
Registered ECC architecture for full-slot stability
The registered design reduces electrical load on the memory controller, allowing all slots to run fully populated at the rated 6400 MT/s speed. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. No heat spreaders are fitted, so ensure chassis airflow meets the server's thermal specifications.
Puntos fuertes
- 1TB capacity with eight 128GB modules for maximum density
- DDR5 6400 speed with CL52 latency at 1.1V for rated performance
- Registered ECC architecture prevents silent data corruption under load
- 2Rx4 dual-rank organisation matches controller expectations for full population
- 288-pin RDIMM form factor verified for Supermicro H13SST-G motherboard
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K8 |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
Does the kit include all eight 128 GB modules or must any be purchased separately?
The package contains the full 1 TB kit — eight 128 GB DDR5 6400 RDIMM modules — so nothing extra is needed for a complete installation.
Why choose the 1 TB 8×128 GB CL52 kit instead of a smaller capacity or different latency?
This exact-match kit delivers the full 1 TB your Supermicro H13SST-G supports with the 2Rx4 registered ECC layout and CL52 timing the board expects, ensuring every slot runs at rated speed.
Will the DDR5 6400 (PC5-51200) rating actually run at 6400 MT/s once installed in the H13SST-G?
Yes — the modules are spec-matched to the motherboard's memory controller, so the 6400 MT/s data rate and CL52 latency are recognised and sustained at the rated 1.1 V.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00095108BTC
En stock