NEMIX RAM
NEMIX RAM 256GB (8×32GB) DDR5 6400 CL52 1.1V 2Rx8 ECC Registered RDIMM memory upgrade
256 GB DDR5-6400 ECC Registered RDIMM kit validated for the Supermicro H14DSH motherboard
- Capacity256GB (8 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from eight 32 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design offloads the memory controller and corrects single-bit errors
- 288-pin RDIMM form factor matches Supermicro H14DSH motherboard requirements
- Built with major-brand Samsung Micron or Hynix DRAM chips
Supermicro H14DSH DDR5 upgrade kit
This 256 GB kit contains eight 32 GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro H14DSH motherboard. The modules arrive new and are validated to match the board's memory-population rules so every slot is recognised at full capacity. System administrators expanding memory on this platform can install the kit without guessing rank, voltage or timing.
Registered ECC RDIMM form factor
The 288-pin Registered (RDIMM) design is the single specification that decides fitment; the H14DSH requires RDIMMs and will not accept UDIMM or SODIMM modules. Each stick runs at 1.1 V with CL52 latency and a 2Rx8 organisation, exactly as the memory controller expects. Buyers whose boards need unbuffered or lower-density DIMMs cannot use this kit.
Sustained enterprise workloads
Registered buffering offloads the memory controller so all eight slots operate fully populated at rated speed during continuous operation. On-die ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots under long-running server loads. The modules have no heat spreader and rely on chassis airflow for thermal management.
Puntos fuertes
- 256 GB total capacity from eight 32 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design offloads the memory controller and corrects single-bit errors
- 288-pin RDIMM form factor matches Supermicro H14DSH motherboard requirements
- Built with major-brand Samsung Micron or Hynix DRAM chips
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
What does the DDR5 6400 CL52 rating mean for actual throughput on a Supermicro H14DSH?
The modules operate at 6400 MT/s with CL52 latency and 1.10 V, delivering the rated PC5-51200 bandwidth when the board's memory controller runs all eight slots fully populated.
How does the registered ECC RDIMM interface affect stability and slot population?
Registered buffering reduces electrical load on the controller so every slot can run at full speed, while ECC detects and corrects single-bit errors to prevent silent data corruption.
Will these 288-pin RDIMMs fit the H14DSH without clearance issues?
Yes, they use the standard 288-pin DDR5 RDIMM form factor with no heat spreader, matching the H14DSH's DIMM slots and population rules exactly.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



