BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00280732BTC
En stock
NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR4 2933MHz CL21 1.2V 288-pin UDIMM memory upgrade
Eight 32 GB DDR4 UDIMM modules totalling 256 GB at 2933 MHz CL21 1.20 V for Supermicro systems
- Capacity256GB (8 x 32GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 256GB total capacity across 8 modules of 32GB each
- DDR4 2933MHz speed rated at PC4-23400 bandwidth
- Low 1.2V operating voltage reduces power draw
- CL21 CAS latency for responsive memory timing
- Validated for Supermicro motherboards including MBD-C9X299-PGF
256GB DDR4 2933 kit for Supermicro workstations
This eight-module kit delivers 256GB of DDR4 2933 memory in matched 32GB UDIMMs. It is built for Supermicro C9X299-PGF motherboards used in desktop workstations and gaming systems. The non-ECC unbuffered design suits platforms that do not require registered or error-correcting modules.
Eight matched sticks simplify full population
Supplying eight identical 2Rx8 modules removes the guesswork of mixing capacities or ranks when filling all slots. The kit arrives pre-tested as a set so the memory controller sees consistent timing across every channel. No extra software or heat spreaders are included in the package.
Verify board slot count and maximum capacity
Confirm the motherboard has eight 288-pin DDR4 slots and supports 256GB total with 32GB UDIMMs at 2933 MT/s. Check that the BIOS recognises non-ECC unbuffered 2Rx8 modules at 1.20V. Systems limited to fewer slots or lower per-slot limits will not accept the full kit.
Puntos fuertes
- 256GB total capacity across 8 modules of 32GB each
- DDR4 2933MHz speed rated at PC4-23400 bandwidth
- Low 1.2V operating voltage reduces power draw
- CL21 CAS latency for responsive memory timing
- Validated for Supermicro motherboards including MBD-C9X299-PGF
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Preguntas sobre este artículo
Will the 2Rx8 DDR4 modules require any firmware updates or component replacements over time?
The kit uses standard JEDEC DDR4 2933MHz CL21 1.2V unbuffered DIMMs with no heat spreaders; no firmware or scheduled part replacements are needed.
What limit appears first when all eight 32GB sticks run continuously at 2933MHz?
The motherboard's maximum supported memory capacity and available 288-pin slots set the hard ceiling for this 256GB configuration.
How much heat and power should I expect from the 1.2V DDR4 kit during all-day workloads?
Each module draws 1.20V at stock speed with no heat spreader, so thermal output stays within standard DDR4 limits for unbuffered UDIMMs.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00283343BTC
En stock
