NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR5 4800 CL40 ECC RDIMM Dell PowerEdge XE9680 memory upgrade
Eight registered DDR5 modules provide 256 GB of ECC server memory at 4800 MHz CL40 for the Dell PowerEdge XE9680
- Capacity256GB (8 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256GB total capacity scales Dell PowerEdge XE9680 workloads
- DDR5 4800 speed feeds data-intensive server applications
- ECC registered design protects mission-critical data integrity
- 10V operation reduces power draw per module
- Eight 32GB 2Rx8 modules populate all channels
Capacity and Compatibility
This 256 GB kit contains eight 32 GB DDR5 4800 RDIMM modules built for the Dell PowerEdge XE9680 rack server. Registered ECC operation and a CL40 latency profile support data-integrity workloads in enterprise environments. The kit targets IT teams upgrading memory capacity on qualified Dell platforms.
Thermals and Power
Modules run at 1.1 V without heat spreaders, relying on the server’s directed airflow for cooling. Registered buffering reduces electrical load on the memory controller during sustained throughput. Power draw scales with the number of populated slots in the chassis.
Build and Installation
Each 288-pin RDIMM uses major OEM DRAM from Samsung, Micron or Hynix and is stress-tested under load before shipping. The registered design requires matching RDIMM slots and compatible BIOS revision on the target system. No additional cables or brackets are included in the package.
Puntos fuertes
- 256GB total capacity scales Dell PowerEdge XE9680 workloads
- DDR5 4800 speed feeds data-intensive server applications
- ECC registered design protects mission-critical data integrity
- 10V operation reduces power draw per module
- Eight 32GB 2Rx8 modules populate all channels
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-324K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Preguntas sobre este artículo
How do I install the 8x32GB DDR5 4800 RDIMM kit in a Dell PowerEdge XE9680, and which step do people get wrong?
Power off the server, open the chassis, and seat each 288-pin module fully until the ejector clips click; the step most often missed is populating all eight slots in the exact channel order shown in the system service manual so the 2Rx8 ranks initialise correctly.
What maintenance or replacement will the 256GB DDR5 ECC registered kit need later?
The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; replacement only occurs if a DIMM fails, at which point the lifetime replacement warranty covers a new 32GB stick.
What limit appears first when the 1.1V CL40 DDR5 4800 memory runs under sustained load?
The CAS latency of CL40 at 4800 MT/s sets the timing boundary; sustained throughput cannot exceed the PC5-38400 data rate, so latency-sensitive workloads hit that ceiling before voltage or thermal limits.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



