NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
62.908,99 US$
0.7866377BTC
En stock
NEMIX RAM
NEMIX RAM 2TB (16 x 128GB) DDR4 3200MHz PC4-25600 4Rx4 ECC RDIMM server RAM
A 2 TB DDR4 server memory kit of 16 registered ECC modules at 3200 MHz with CAS 22 latency
- Capacity2TB (16 x 128GB)
- SpeedDDR4 3200 (PC4 25600)
- CAS Latency22
- Voltage1.2V
- ECCYes
- Buffered/RegisteredRegistered
- 2TB total capacity from sixteen 128GB modules
- DDR4 3200 speed with PC4-25600 bandwidth rating
- ECC registered design protects data integrity in servers
- 4Rx4 organisation and CAS 22 latency for high-density performance
- 2V operation across 288-pin RDIMM form factor
Server Memory Kit
This NEMIX RAM kit provides 2TB of DDR4 server memory across sixteen 128GB registered DIMMs. Each module operates at 3200MHz with a CAS latency of 22 and runs at 1.2V. The 4Rx4 organisation and ECC support are built for multi-socket platforms that require registered memory.
Suited for capacity-bound servers.
The kit targets administrators expanding memory in servers that accept 288-pin DDR4 RDIMMs at 3200MHz. Workstations or consumer motherboards that only support unbuffered DIMMs cannot use these modules. Buyers needing non-ECC or lower-density sticks should select a different product.
4Rx4 registered organisation decides fit
The 4Rx4 rank structure determines whether the memory controller can address the full 2TB across sixteen slots. Platforms limited to dual-rank or single-rank DIMMs will not recognise the full capacity. Verify the server's qualified vendor list for 4Rx4 RDIMM support before purchase.
Puntos fuertes
- 2TB total capacity from sixteen 128GB modules
- DDR4 3200 speed with PC4-25600 bandwidth rating
- ECC registered design protects data integrity in servers
- 4Rx4 organisation and CAS 22 latency for high-density performance
- 2V operation across 288-pin RDIMM form factor
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR25600-744K16-SM-SYS-120C-TN10R |
| Part Number | Part#: MR25600-744K16-SM-SYS-120C-TN10R |
| Capacity | 2TB (16 x 128GB) |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Preguntas sobre este artículo
What server motherboard slot is required for these 288-pin DDR4 RDIMMs?
The modules use the standard 288-pin DDR4 RDIMM form factor and fit any server board with matching registered DIMM slots.
Which population rules apply when installing all 16 modules in a 4Rx4 configuration?
Follow the motherboard manual for 4Rx4 population order; the common mistake is filling slots sequentially instead of the prescribed channel sequence.
When should the 16 modules be reseated or replaced during server maintenance?
Reseat if ECC correctable errors rise or after major firmware updates; replace only if uncorrectable errors persist or a module fails diagnostics.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
57.634,99 US$
0.72068962BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
53.038,99 US$
0.6632195BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
70.395,99 US$
0.88025797BTC
En stock