BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00279553BTC
En stock
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX XT-6517 JIVA
DDR4 SODIMM kit adding 32 GB across two 16 GB modules at 2400 MHz CL17 for the POSIFLEX XT-6517 JIVA terminal
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB total capacity across two 16 GB modules for multitasking headroom
- DDR4 2400 speed rated at PC4-19200 for responsive data throughput
- CL17 CAS latency tuned for stable timing in POS workloads
- 20 V low-voltage operation reduces power draw and heat
- 260-pin SODIMM form factor built for POSIFLEX XT-6517 JIVA terminal
POSIFLEX XT-6517 JIVA memory kit
This 32 GB kit contains two 16 GB DDR4 SODIMM modules built for the POSIFLEX XT-6517 JIVA terminal. It targets technicians who need to maximise the memory capacity of that specific fanless point-of-sale system. The unbuffered non-ECC design matches the platform requirements exactly.
DDR4 2400 speed and density limits
The modules run at 2400 MHz with CL17 latency and 1.20 V operation. The 2Rx8 organisation and 260-pin form factor are fixed by the DDR4 SODIMM standard, so the terminal cannot use faster speeds, lower latencies or different pin counts. Capacity is capped at 32 GB by the two-slot layout of the host system.
Straightforward SODIMM installation
Installation consists of opening the terminal chassis, aligning each module with the 260-pin slot and pressing until the latches engage. The most common issues are failing to seat both modules fully or mixing this kit with existing memory of a different speed or rank. The fanless design means there is no extra airflow, so verify the terminal recognises the full 32 GB before reassembling the case.
Puntos fuertes
- 32 GB total capacity across two 16 GB modules for multitasking headroom
- DDR4 2400 speed rated at PC4-19200 for responsive data throughput
- CL17 CAS latency tuned for stable timing in POS workloads
- 20 V low-voltage operation reduces power draw and heat
- 260-pin SODIMM form factor built for POSIFLEX XT-6517 JIVA terminal
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
Preguntas sobre este artículo
Should I choose the 32 GB kit or buy a single 16 GB module instead?
The kit supplies two matched 16 GB modules for 32 GB total; a single module would run in single-channel mode and halve peak bandwidth.
What does the 2400 MHz rating deliver inside the POSIFLEX XT-6517 JIVA?
The memory runs at DDR4 2400 (PC4-19200) with CL17 latency at 1.20 V, giving the terminal its maximum supported transfer rate.
Will the 260-pin SODIMM interface limit bandwidth on this terminal?
The 260-pin DDR4 SODIMM slot caps the connection at the module's rated PC4-19200 speed; no higher standard is supported by the platform.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00282153BTC
En stock
