Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green DDR4 ECC UDIMM sticks, no heat spreaders, 288-pin edges

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4-2933 ECC UDIMM CL21 1Rx8 1.2V 288-pin memory upgrade

SKU CH-B0TQ-REF83

32 GB dual-channel DDR4-2933 ECC UDIMM kit with CL21 timing and 1.2 V operation for Supermicro X12SCZ motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 32GB 2X16GB

  • ECC protection prevents silent data corruption
  • 32 GB kit delivers 2 × 16 GB modules
  • DDR4-2933 speed matches PC4-23400 specification
  • 20 V operation reduces power draw
  • 288-pin UDIMM fits Supermicro X12SCZ-F/TLN4F boards

Exact-match DDR4 ECC kit

This 32 GB kit contains two 16 GB unbuffered ECC UDIMMs rated at DDR4-2933 with CL21 timings at 1.2 V. The modules use a 1Rx8 rank structure and 288-pin form factor so the memory controller recognises the full capacity at its rated speed.

Verify board population rules

The kit is validated for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards that require unbuffered ECC UDIMMs. Check your system manual for supported capacities, approved DIMM population order and installation steps before ordering.

Standard voltage thermals

Operating at 1.2 V without a heat spreader, the modules run at standard DDR4 power levels in typical server or workstation workloads. Passive airflow from chassis fans is sufficient for normal use.

Puntos fuertes

  • ECC protection prevents silent data corruption
  • 32 GB kit delivers 2 × 16 GB modules
  • DDR4-2933 speed matches PC4-23400 specification
  • 20 V operation reduces power draw
  • 288-pin UDIMM fits Supermicro X12SCZ-F/TLN4F boards

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What comes in the kit and do I need anything else to install it?

The kit contains two 16 GB DDR4 ECC UDIMM modules for a total of 32 GB. No extra parts are required; they plug directly into the 288-pin DIMM slots on the Supermicro X12SCZ-F or X12SCZ-TLN4F motherboard.

Should I pick this 32 GB kit or a different capacity for my Supermicro board?

Choose this 32 GB kit if your workload needs 32 GB and the board manual confirms two 16 GB 1Rx8 UDIMMs in the supported population order. Select another capacity only if the manual lists a different approved configuration.

Will the DDR4-2933 CL21 rating actually run at that speed once installed?

Yes. The modules are spec-matched to the board's DDR4-2933 (PC4-23400) memory controller, so the system recognises the 1Rx8 rank, 1.2 V voltage and CL21 timing and operates at the rated 2933 MT/s.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.