BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.0027811BTC
En stock
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 262-Pin SODIMM for ASRock IMB-X1244-WV memory upgrade
32 GB DDR5 SODIMM kit (2 × 16 GB) at 5600 MT/s CL46 1.1 V for ASRock IMB-X1244-WV
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit boosts multitasking headroom with two 16 GB modules
- DDR5 5600 speed delivers high bandwidth for demanding workloads
- CL46 latency keeps response tight under load
- 1 V operation reduces power draw and heat
- 262-pin SODIMM fits ASRock IMB-X1244-WV Mini-ITX board
Capacity and fit
This kit delivers 32GB of DDR5 memory in two 16GB SODIMM modules built for the ASRock Industrial IMB-X1244-WV Mini-ITX motherboard. The 262-pin form factor matches the board's SO-DIMM slots and the 1.1V operating voltage aligns with the platform's DDR5 power requirements.
Who it suits and who it does not
The modules suit owners of that specific ASRock board who need a straightforward capacity increase without ECC or registered signalling. Buyers who want error-correcting memory, a different pin count or a speed other than 5600 MT/s should look at other kits.
Installation and common issues
Each stick inserts vertically into the SO-DIMM socket until the retention clips engage, a process that typically takes minutes. The most frequent problem is seating a module at an angle so the contacts do not make full contact, which prevents the system from posting.
Puntos fuertes
- 32 GB kit boosts multitasking headroom with two 16 GB modules
- DDR5 5600 speed delivers high bandwidth for demanding workloads
- CL46 latency keeps response tight under load
- 1 V operation reduces power draw and heat
- 262-pin SODIMM fits ASRock IMB-X1244-WV Mini-ITX board
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Preguntas sobre este artículo
Does this 32 GB kit require a motherboard with DDR5 SODIMM slots such as the ASRock IMB-X1244-WV to operate?
Yes, the modules are 262-pin DDR5 SODIMMs rated for 5600 MHz and 1.10 V, so they need a board that supports DDR5 SODIMM memory.
Will these CL46 1Rx8 modules run at 5600 MHz if the board defaults to a lower JEDEC speed?
The kit is specified at DDR5 5600 (PC5-44800) with CL46; the motherboard will set the highest common speed both the CPU and memory support.
How can I verify the system sees both 16 GB modules at the correct 5600 MT/s data rate after installation?
Check the memory section in BIOS or use a tool such as CPU-Z to confirm 32 GB total capacity, 5600 MT/s frequency and CL46 timings.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280697BTC
En stock
