Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green circuit board DDR4 memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz PC4-23400 2Rx8 CL21 ECC RDIMM ASUS Pro WS C422-ACE memory upgrade

SKU CH-E5ZC-86YGV

32 GB DDR4 ECC registered DIMM running at 2933 MHz with CL21 latency for the ASUS Pro WS C422-ACE workstation motherboard

  • Capacity32GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 32GB

  • Full 32 GB capacity recognised at rated DDR4-2933 speed
  • Registered ECC design corrects single-bit errors preventing silent data corruption
  • Exact-match 288-pin RDIMM fits ASUS Pro WS C422-ACE memory slots
  • 2 V operation and CL21 timing match motherboard controller expectations
  • Built with major OEM Samsung Micron Hynix chips for enterprise stability

Exact-match upgrade for ASUS Pro WS C422-ACE

This 32GB DDR4 2933MHz PC4-23400 2Rx8 ECC RDIMM is built for the ASUS Pro WS C422-ACE workstation motherboard. The registered architecture and CL21 timing match the board's memory controller requirements. It installs as a single 288-pin module operating at 1.20V. Builders needing a different form factor or non-ECC memory should look elsewhere.

Sustained-load behaviour with registered ECC

Registered buffering offloads the memory controller so every slot runs fully populated at rated speed without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute jobs. The 1.20V operation keeps thermals stable under continuous load. Workloads that exceed single-module capacity or require unbuffered memory will not benefit from this design.

Deciding specification: 2Rx8 registered ECC at CL21

The 2Rx8 registered ECC organisation with CL21 latency is the single parameter the ASUS Pro WS C422-ACE memory controller expects for full-capacity recognition. A mismatched rank, voltage, or buffering type will cause the system to downclock, halve usable capacity, or fail to boot. Verify your manual's approved population order before purchasing.

Puntos fuertes

  • Full 32 GB capacity recognised at rated DDR4-2933 speed
  • Registered ECC design corrects single-bit errors preventing silent data corruption
  • Exact-match 288-pin RDIMM fits ASUS Pro WS C422-ACE memory slots
  • 2 V operation and CL21 timing match motherboard controller expectations
  • Built with major OEM Samsung Micron Hynix chips for enterprise stability

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR23400-328K1
Capacity32GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How much power does this 1.2V DDR4 module draw when the ASUS Pro WS C422-ACE workstation runs continuously?

At 1.20 V the module operates at standard DDR4 voltage, so power draw stays within the JEDEC spec for registered ECC RDIMMs and the motherboard's memory controller manages any throttling.

What motherboard slot and population rules must my ASUS Pro WS C422-ACE already have free to install this 288-pin RDIMM?

The board needs an empty 288-pin DDR4 RDIMM slot and you must follow the manual's population order; the module is a 2Rx8 registered DIMM that only fits registered-memory slots.

Will this CL21 registered ECC kit work alongside older DDR4 RDIMMs I keep in the other channels of my C422-ACE?

Mixed ranks and latencies are supported by the C422 chipset, but the system will run all modules at the slowest common speed and timings; populate per the manual for stability.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.