Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR5 RDIMM sticks without heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 5600 CL46 1.1V ECC RDIMM memory upgrade

SKU CH-BD63-H3RPQ

A 384 GB DDR5 registered ECC kit of four 96 GB modules running at 5600 MT/s with CL46 timing and 1.1 V operation, built for the Supermicro H13DSH motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Ver 30 configuraciones más
  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5-5600 PC5-44800 speed with CL46 latency matches platform timing requirements
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank keeps power draw low while running fully populated
  • Verified 288-pin fitment for the Supermicro H13DSH motherboard memory slots

384 GB DDR5 RDIMM kit for Supermicro H13DSH

This 384 GB kit contains four 96 GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the Supermicro H13DSH memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly.

Suits administrators expanding a validated H13DSH

Administrators who need the precise 2Rx4 1.1 V CL46 configuration listed in their board manual will install this kit and reach full capacity immediately. Builders using consumer boards, workstations requiring UDIMMs, or systems limited to lower maximum densities should select different memory.

DDR5 5600 CL46 2Rx4 1.1 V Registered ECC spec

The single specification that decides fitment is the DDR5 5600 CL46 2Rx4 1.1 V Registered ECC combination your motherboard qualifies. If the manual calls for a different speed, latency, rank structure or voltage, this kit will not operate as intended.

Puntos fuertes

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5-5600 PC5-44800 speed with CL46 latency matches platform timing requirements
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank keeps power draw low while running fully populated
  • Verified 288-pin fitment for the Supermicro H13DSH motherboard memory slots

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the CL46 timing run at full speed once all four 96GB modules are installed in a Supermicro H13DSH?

The kit is spec-matched to the board's memory-population rules, so all four 96GB RDIMMs operate at DDR5 5600 with CL46 latency when populated correctly.

What does PC5-44800 mean for the DDR5 5600 interface on this registered ECC kit?

PC5-44800 is the standard designation for DDR5 5600; the registered buffer lets each slot run at that rate fully populated without downclocking.

Does the 288-pin RDIMM form factor with 2Rx4 organisation fit the H13DSH memory slots directly?

Yes, the 288-pin registered DIMM matches the motherboard's required form factor and rank configuration for proper seating and recognition.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.