NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
62.908,99 US$
0.787317BTC
En stock
NEMIX RAM
NEMIX RAM 4GB DDR4 2133 CL15 1.2V 288-Pin UDIMM memory upgrade
A 4 GB DDR4 2133 CL15 1.2 V 288-pin UDIMM module built with Samsung chips for Samsung desktop compatibility
- Capacity4GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 4GB capacity adds responsive multitasking headroom
- DDR4 2133 speed matches system memory bus
- Low 1.2V operation reduces power draw
- CL15 latency keeps data access snappy
- 288-pin UDIMM fits standard desktop DIMM slots
NEMIX RAM 4GB DDR4 2133 UDIMM
This 4GB DDR4 module runs at 2133MHz with CL15 latency and 1.2V operation. It uses a 288-pin unbuffered non-ECC design built with major OEM Samsung, Micron or Hynix chips. The single-rank 1Rx6 configuration fits standard desktop DIMM slots without a heat spreader.
Desktop users upgrading compatible Samsung systems
The module targets owners of Samsung desktops needing a direct replacement or capacity boost matched to the M378A5244CB0-CPB specification. Builders requiring ECC error correction, registered buffering, higher speeds or larger single-module capacities should look at other product lines.
4GB capacity for light workloads
Four gigabytes handles basic office applications, web browsing and older operating systems comfortably. Modern multitasking, current games or memory-intensive creative suites will exhaust this headroom quickly, leading to paging and reduced responsiveness.
Puntos fuertes
- 4GB capacity adds responsive multitasking headroom
- DDR4 2133 speed matches system memory bus
- Low 1.2V operation reduces power draw
- CL15 latency keeps data access snappy
- 288-pin UDIMM fits standard desktop DIMM slots
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD17000-416K1 |
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx6 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR4 2133MHZ PC4-17000 1Rx6 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM |
Preguntas sobre este artículo
Does my motherboard need a 288-pin DDR4 UDIMM slot to accept this module?
Yes, this is a 288-pin DDR4 UDIMM running at 1.20 V, so the board must provide a standard DDR4 DIMM slot and operate at that voltage.
Will this CL15 stick run stably if I keep my existing CL15 DDR4 2133 modules?
Mixing modules with the same speed and CAS latency of CL15 at 2133 MHz generally allows the system to run all sticks at those shared timings without manual adjustment.
How can I confirm the module is recognised at 2133 MHz and CL15 after installation?
Open the BIOS or a tool such as CPU-Z and verify the memory frequency shows 2133 MHz with CAS latency 15.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
57.634,99 US$
0.72131197BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
53.038,99 US$
0.66379222BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
70.395,99 US$
0.88101811BTC
En stock