NEMIX RAM
NEMIX RAM 512GB 16x32GB DDR5 6400 ECC RDIMM Supermicro H14DST-FL
512 GB server kit with sixteen 32 GB DDR5 ECC registered DIMMs running at 6400 MT/s, CL52, 1.1 V, validated for Supermicro H14DST-FL
- Capacity512GB (16 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity for memory-intensive workloads backed by 16 × 32 GB modules
- DDR5-6400 speed with CL52 latency matches the server controller's rated timing
- Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
- 1 V operation at 2Rx8 rank reduces electrical load across all 16 populated slots
- 288-pin RDIMM form factor verified for Supermicro H14DST-FL motherboard compatibility
512GB DDR5 ECC RDIMM kit for Supermicro H14DST-FL
This 512GB kit contains sixteen 32GB DDR5 6400 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. It is intended for administrators who need maximum supported capacity in every slot without manual tuning.
Capacity and headroom at full population
Sixteen dual-rank 2Rx8 modules fill all DIMM sockets and deliver 512GB of addressable memory for large databases, virtualization hosts or in-memory analytics. The registered architecture keeps the memory controller stable at full capacity, while on-die ECC corrects single-bit errors before they affect workloads. Systems that require more than 512GB or a different DIMM type cannot use this kit.
Thermals, noise and power in normal use
Each module operates at 1.10V without a heat spreader, relying on chassis airflow for cooling. Power draw scales with the number of populated slots, so a fully loaded board will draw more current than a partially filled one. The registered buffers add negligible latency and do not produce audible noise; thermal performance depends entirely on the server's fan profile.
Puntos fuertes
- 512 GB total capacity for memory-intensive workloads backed by 16 × 32 GB modules
- DDR5-6400 speed with CL52 latency matches the server controller's rated timing
- Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
- 1 V operation at 2Rx8 rank reduces electrical load across all 16 populated slots
- 288-pin RDIMM form factor verified for Supermicro H14DST-FL motherboard compatibility
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K16 |
| Capacity | 512GB (16 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 16X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
Will the 288-pin DDR5 6400 RDIMMs populate all 16 slots on my Supermicro H14DST-FL without downclocking?
Yes, the kit matches the board's required registered ECC 2Rx8 1.1V CL52 spec so the memory controller recognises every module at the rated 6400 MT/s speed.
How can I confirm the 512 GB kit is running at DDR5 6400 with ECC active after installation?
Check the BIOS memory information screen — it should show 512 GB total, 6400 MT/s data rate, CL52 latency and ECC enabled for each of the 16 DIMMs.
Does the 16 x 32 GB package include heatsinks or any extra cables I need to buy separately?
The modules ship without heat spreaders and no cables are included; only the 16 registered DIMMs are in the box.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



