Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5 5600 CL46 2Rx8 1.1V SODIMM memory upgrade

SKU CH-9J6H-9MTHQ

A 64 GB DDR5 SODIMM kit running at 5600 MHz with CL46 latency and 1.1 V operation, validated for Supermicro X14SAV-F motherboards

  • Capacity64GB (2 x 32GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB total capacity in a 2 × 32 GB kit for expanded multitasking headroom
  • DDR5 5600 speed rated at PC5-44800 for high data throughput
  • CL46 latency and 1.1 V operation matching the system's memory controller
  • 2Rx8 dual-rank unbuffered SODIMM layout for full compatibility with the Supermicro X14SAV-F
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

Exact-match DDR5-5600 SODIMM kit

This NEMIX RAM kit provides 64GB of DDR5 memory in two 32GB modules rated at 5600 MT/s with CL46 latency. It uses the 262-pin SODIMM form factor required by compatible laptops and select server boards. The modules operate at 1.1V and are built with major OEM chips from Samsung Micron or Hynix.

Suited for Supermicro X14SAV-F upgrades

This kit is validated for the Supermicro X14SAV-F motherboard and matches its memory population rules. It is not suitable for systems that require ECC registered DIMMs or desktop UDIMM form factors. Buyers needing error correction or a different pin layout should look elsewhere.

2Rx8 rank and 1.1V voltage decide fit

The dual-rank 2Rx8 organisation and 1.1V operating voltage are the critical specifications that determine whether the memory controller will recognise the full capacity and run at the rated 5600 speed. Verify your system manual supports this rank structure and voltage before purchase.

Puntos fuertes

  • 64 GB total capacity in a 2 × 32 GB kit for expanded multitasking headroom
  • DDR5 5600 speed rated at PC5-44800 for high data throughput
  • CL46 latency and 1.1 V operation matching the system's memory controller
  • 2Rx8 dual-rank unbuffered SODIMM layout for full compatibility with the Supermicro X14SAV-F
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-328K2
Capacity64GB (2 x 32GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will this DDR5 5600 kit work in a Supermicro X14SAV-F motherboard with 262-pin SODIMM slots?

Yes, this 64 GB kit is built to the exact 262-pin DDR5 SODIMM form factor, 1.1 V voltage, CL46 timing and 2Rx8 rank that the X14SAV-F memory controller expects, so it will be recognised at full capacity and run at its rated speed.

Can I mix these 2Rx8 modules with older 1Rx8 DDR5 sticks already in the system?

Mixing different rank configurations on the same channel can prevent the memory controller from training at 5600 MT/s; for stable operation populate all slots with identical 2Rx8 modules or follow the motherboard manual’s approved population order.

How do I confirm the kit is running at DDR5 5600 CL46 after installation?

Enter the system BIOS or use a utility such as CPU-Z and verify the memory frequency reads 5600 MT/s (PC5-44800) with CAS latency 46 and voltage 1.10 V.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.