BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278755BTC
En stock
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 260-PIN SODIMM POSIFLEX XT-8315E JIVA memory upgrade
64 GB DDR4 3200 SODIMM kit (2 × 32 GB) built for the POSIFLEX XT-8315E JIVA terminal
- Capacity64GB (2 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB kit expands POS terminal capacity
- DDR4 3200 speed matches system specifications
- CL22 latency at 1.2 V operation
- 260-pin SODIMM fits POSIFLEX XT-8315E JIVA
- Two 32 GB modules enable dual-channel performance
POSIFLEX XT-8315E JIVA memory kit
This 64GB kit contains two 32GB DDR4 3200 SODIMM modules built for the POSIFLEX XT-8315E JIVA terminal. It runs at 1.2V with CL22 latency and uses unbuffered, non-ECC chips from major OEM suppliers. The 260-pin form factor fits the system's memory slots directly.
Suits POS terminal upgrades.
Technicians maintaining POSIFLEX point-of-sale hardware can install this kit to reach the platform's 64GB capacity limit. Buyers who need error-correcting code memory for data integrity should look elsewhere, as these modules are non-ECC. Systems requiring registered or buffered DIMMs are also incompatible with this unbuffered design.
2Rx8 dual-rank organisation per module
Each 32GB SODIMM uses a 2Rx8 configuration, which determines how the memory controller addresses the chips. This rank structure must match the terminal's memory controller requirements for stable operation. Verifying that the platform supports 2Rx8 modules is the single specification that decides whether this kit will work.
Puntos fuertes
- 64 GB kit expands POS terminal capacity
- DDR4 3200 speed matches system specifications
- CL22 latency at 1.2 V operation
- 260-pin SODIMM fits POSIFLEX XT-8315E JIVA
- Two 32 GB modules enable dual-channel performance
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Preguntas sobre este artículo
Will the 3200 MHz DDR4 SODIMMs run reliably alongside any original memory still installed in the POSIFLEX XT-8315E JIVA?
The kit is validated for the XT-8315E JIVA terminal; when mixed with existing modules the system will operate at the lowest common speed and voltage, so stability depends on matching the 1.20 V DDR4 specification.
How can I confirm the 64 GB kit is recognised and running at CL22 after installation?
Boot the terminal and open the BIOS or a system-information tool — it should show 64 GB total, DDR4-3200 frequency and CAS latency 22 for each 32 GB module.
Does the MS25600-328K2 package include only the two 260-pin SODIMMs or any extra brackets or tools?
The box contains only the two 32 GB 260-pin DDR4 SODIMMs; no brackets, screws or tools are supplied.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00281348BTC
En stock
