BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278196BTC
En stock
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM for ASUS ProArt Z890-CREATOR WiFi memory upgrade
A 64 GB DDR5 memory kit with two 32 GB unbuffered UDIMM modules running at 5600 MHz CL46 and 1.10 V, validated for the ASUS ProArt Z890-CREATOR WiFi motherboard
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64GB kit doubles workstation capacity for heavy multitasking
- DDR5 5600 speed feeds data to ASUS ProArt Z890-CREATOR WiFi
- CL46 latency keeps response tight under sustained loads
- 1V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per 288-pin slot
64GB DDR5 kit for ASUS ProArt Z890-CREATOR
This 64GB kit contains two 32GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency. It is built for the ASUS ProArt Z890-CREATOR WiFi motherboard and targets creators or professionals who need more memory capacity for multitasking and content workloads.
Upgrade from lower-capacity or slower DDR5
The kit replaces smaller DDR5 kits or slower memory to raise total capacity to 64GB at the standard 5600MHz speed. The jump is worth it when your current memory limits simultaneous applications, large project files or virtual machines and the board supports this frequency.
Straightforward UDIMM installation
The 288-pin unbuffered non-ECC modules install in the motherboard DIMM slots without tools or special configuration. Common issues include not seating both modules fully until the retention clips click, mixing with incompatible memory kits or forgetting to enable the correct memory profile in BIOS.
Puntos fuertes
- 64GB kit doubles workstation capacity for heavy multitasking
- DDR5 5600 speed feeds data to ASUS ProArt Z890-CREATOR WiFi
- CL46 latency keeps response tight under sustained loads
- 1V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per 288-pin slot
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Preguntas sobre este artículo
Will these 288-pin DDR5 UDIMM modules fit the four DIMM slots on my ASUS ProArt Z890-CREATOR WiFi motherboard?
Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor that matches the four memory slots on the ASUS ProArt Z890-CREATOR WiFi board.
Do I need to enable XMP or EXPO in the BIOS after installing the two 32 GB sticks, or will they run at 5600 MT/s automatically?
DDR5 defaults to JEDEC speeds, so the modules will run at 5600 MT/s CL46 1.10 V without any manual BIOS profile; enable XMP only if you want to exceed the rated speed.
The kit has no heat spreader — will the bare PCB and 2Rx8 chips need active airflow or replacement over time?
DDR5 UDIMMs at 1.10 V run cool enough for typical chassis airflow; no scheduled maintenance or replacement is required unless a module fails.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280784BTC
En stock
