Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green 288-pin DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5-5600 ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-9TY8-EX3Z2

A 64GB dual-channel DDR5 kit with ECC and registered buffering for the GIGABYTE MZ33-CP1 motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Ver 24 configuraciones más
  • 64 GB capacity with two 32 GB modules for full-channel bandwidth
  • DDR5-5600 PC5-44800 speed matches the board's rated memory clock
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V CL46 2Rx8 timing aligns with the memory controller's exact requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard slots

Exact-match DDR5 RDIMM kit for GIGABYTE MZ33-CP1

This NEMIX RAM kit delivers 64 GB across two 32 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It targets administrators upgrading the GIGABYTE MZ33-CP1 motherboard where registered DIMMs are mandatory and every slot must run at full rated speed.

Registered DDR5 limits slot count

The registered architecture offloads the memory controller so all slots can be fully populated, but the MZ33-CP1 manual dictates exact population sequences and maximum capacity per channel. Installing modules outside the approved order or exceeding the board's validated rank limit will prevent the system from posting at 5600 MT/s.

2Rx8 rank structure decides full-capacity

Each module uses a 2Rx8 organisation that the board's memory controller expects for 64 GB operation at CL46 and 1.1 V. If the platform requires a different rank-per-DIMM layout or a lower voltage, the kit will not train at its rated frequency and the capacity will not be recognised.

Puntos fuertes

  • 64 GB capacity with two 32 GB modules for full-channel bandwidth
  • DDR5-5600 PC5-44800 speed matches the board's rated memory clock
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V CL46 2Rx8 timing aligns with the memory controller's exact requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard slots

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Should I choose the 64GB (2x32GB) kit or a different capacity for my GIGABYTE MZ33-CP1?

The 64GB kit provides two 32GB modules that match the board's DDR5-5600 RDIMM requirement; consult your motherboard manual for approved population rules and maximum supported capacity before deciding.

What does the DDR5-5600 speed rating deliver once installed in the server?

The modules run at 5600 MT/s with CL46 latency at 1.10V, giving the memory controller the exact timing and voltage it expects for full-speed operation across both DIMMs.

How does the 288-pin Registered ECC interface affect real-world stability?

The registered buffer reduces electrical load on the controller so all slots can be populated at rated speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.