BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
NEMIX RAM
Four 16 GB DDR5 modules at 5600 MHz with CL46 latency for Dell Pro Max Slim desktops
This NEMIX RAM kit delivers 64GB across four 16GB modules running at DDR5 5600 with CL46 latency. It is built as non-ECC unbuffered UDIMMs at 1.1V for the Dell Pro Max Slim desktop. The 288-pin form factor matches the board slots exactly.
Swapping lower-speed DDR5 for this 5600MHz kit raises bandwidth to PC5-44800 without changing voltage. The upgrade is worthwhile when the system currently runs at a lower DDR5 data rate or when all four slots are vacant and maximum capacity is needed.
The 4x16GB configuration occupies all UDIMM sockets on the motherboard, leaving no room for further expansion. No heat spreaders are fitted, so clearance around the CPU cooler is unaffected. The kit requires a board that supports 1Rx8 DDR5 UDIMMs at 1.1V.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Yes, the kit uses standard 288-pin DDR5 UDIMM form factor that matches the Dell Pro Max Slim Desktop memory slots.
Populate the motherboard slots in the sequence shown in the Dell service manual, usually alternating channels, so the 1Rx8 ranks initialise correctly.
Replace the kit when the BIOS or OS reports uncorrectable memory errors, since these non-ECC modules cannot correct single-bit faults.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?