NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
62.908,99 US$
0.7880567BTC
En stock
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 ECC UDIMM CL22 1.20V 1Rx8 QNAP NAS Memory
An 8 GB DDR4 3200 ECC UDIMM module with CL22 latency and 1.20 V operation for compatible QNAP NAS systems
- Capacity8GB (1 x 8GB)
- Type288-Pin DDR4 ECC UDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- ECC protection guards data integrity
- 3200 MHz speed lifts throughput
- 20 V operation reduces power draw
- 288-pin UDIMM fits QNAP NAS slots
- Major OEM chips ensure module reliability
8 GB DDR4 ECC UDIMM for QNAP NAS
This NEMIX RAM module adds 8 GB of DDR4 3200 ECC memory to compatible QNAP NAS devices. It uses a single 288‑pin unbuffered UDIMM running at 1.20 V with CL22 latency. The 1Rx8 organisation and major‑brand DRAM chips are validated for the QNAP RAM‑8GDR4ECI0‑UD‑3200 specification.
Suits NAS owners needing ECC protection.
Builders upgrading a QNAP NAS that requires ECC unbuffered DDR4 will gain error‑correcting stability for file services and virtualization. Systems that only accept non‑ECC UDIMMs or registered DIMMs cannot use this module, and platforms limited to lower DDR4 speeds will not reach the rated 3200 MT/s.
Steady throughput under continuous NAS workloads
Rigorous stress testing under sustained load confirms reliable operation during long backup, replication and virtualization tasks. The module maintains its rated speed and voltage without throttling, delivering consistent bandwidth for multi‑user file access and background scrubbing jobs.
Puntos fuertes
- ECC protection guards data integrity
- 3200 MHz speed lifts throughput
- 20 V operation reduces power draw
- 288-pin UDIMM fits QNAP NAS slots
- Major OEM chips ensure module reliability
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | ME25600-818K1 |
| Capacity | 8GB (1 x 8GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC UDIMM Motherboard Compatible |
Preguntas sobre este artículo
Do I need a motherboard with 288-pin DDR4 slots to install this module?
Yes, this is a 288-pin DDR4 UDIMM and requires a board with matching DDR4 slots.
Will the ECC feature function if I pair this 1Rx8 stick with older non-ECC modules in the same system?
ECC generally requires all installed modules to support it and the platform to enable it; mixing with non-ECC memory typically disables ECC for the entire array.
How can I verify the stick is running at 3200 MT/s with CL22 timings after installation?
Check the memory speed and CAS latency reported in the BIOS or a tool such as CPU-Z once the system posts.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
57.634,99 US$
0.72198965BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
53.038,99 US$
0.66441587BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
70.395,99 US$
0.88184584BTC
En stock