BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277984BTC
En stock
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 UDIMM for ASRock IMB-1317, IMB-X1317
96GB DDR5 kit with two 48GB modules running at 5600MHz CL46 for ASRock IMB-1317 and IMB-X1317 motherboards
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB total capacity from two 48 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency at 1.1 V operating voltage
- 288-pin UDIMM form factor fits ASRock IMB-1317 and IMB-X1317
- Dual-rank 2Rx8 organisation using major OEM DRAM chips
Capacity and fit
This kit delivers 96GB across two 48GB DDR5 UDIMM modules built for ASRock Industrial IMB-1317 and IMB-X1317 micro-ATX motherboards. It targets embedded developers and industrial PC integrators who need maximum supported memory on these specific boards.
Upgrade path
The 2Rx8 organisation and 5600 MT/s rating let you move from lower-density or slower DDR5 kits without changing the platform. The jump is worth it when your workload hits the capacity ceiling of smaller modules or when the board's qualified vendor list calls for this exact part number.
Pre-order checks
Verify that your IMB-1317 or IMB-X1317 revision accepts 48GB single-rank-equivalent density and that the BIOS is current enough to initialise 2Rx8 modules at 1.10V. Systems requiring ECC or registered memory cannot use this non-ECC unbuffered kit.
Puntos fuertes
- 96 GB total capacity from two 48 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency at 1.1 V operating voltage
- 288-pin UDIMM form factor fits ASRock IMB-1317 and IMB-X1317
- Dual-rank 2Rx8 organisation using major OEM DRAM chips
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Preguntas sobre este artículo
Will the 288-pin DDR5 UDIMM modules fit the ASRock IMB-1317 and IMB-X1317 motherboards?
Yes, the kit is built as 288-pin DDR5 UDIMM modules specifically for the ASRock Industrial Micro-ATX boards IMB-1317 and IMB-X1317.
What is the correct way to seat both 48GB modules, and which step do people often miss?
Align the notch on each 288-pin module with the slot key, press down firmly until the side clips click shut on both sticks, then verify in BIOS that 96GB is detected at 5600 MT/s.
When will the 2Rx8 1.10V DDR5 modules need replacement under normal use?
DDR5 UDIMM memory has no moving parts and no scheduled replacement interval; the modules are covered by a lifetime replacement warranty from the manufacturer.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
