SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.0050167BTC
En stock
NEMIX RAM
NEMIX RAM 96GB (6×16GB) DDR5-6400 CL52 1Rx8 ECC Registered RDIMM memory upgrade
96 GB DDR5-6400 ECC Registered RDIMM kit of six 16 GB modules at CL52 and 1.1 V, validated for the Supermicro H14DST-F motherboard
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 CL52 1.10V spec matches server memory controller for full-speed recognition
- 6 × 16 GB registered ECC RDIMM kit delivers 96 GB capacity across all populated slots
- Registered architecture offloads memory controller enabling stable full-population operation at rated speed
- On-die ECC corrects single-bit errors preventing silent data corruption and unexpected downtime
- Validated for Supermicro H14DST-F motherboard 288-pin RDIMM slot requirements and population rules
96GB DDR5-6400 ECC RDIMM Kit
This 96GB kit contains six 16GB DDR5-6400 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-F motherboard expects. Each module runs at 1.1V with CL52 latency and uses major OEM chips for reliable server operation.
Suited for H14DST-F memory upgrades
Ideal for administrators expanding a Supermicro H14DST-F to its full 96GB capacity with matched modules that populate every slot correctly. Not for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory or speeds other than DDR5-6400.
Six-module kit enables full population
The six-piece kit lets you fill all supported DIMM slots in one purchase, ensuring identical rank and timing across channels for stable multi-channel operation. No heat spreaders are included, so airflow in dense server chassis remains unobstructed.
Puntos fuertes
- Exact DDR5-6400 CL52 1.10V spec matches server memory controller for full-speed recognition
- 6 × 16 GB registered ECC RDIMM kit delivers 96 GB capacity across all populated slots
- Registered architecture offloads memory controller enabling stable full-population operation at rated speed
- On-die ECC corrects single-bit errors preventing silent data corruption and unexpected downtime
- Validated for Supermicro H14DST-F motherboard 288-pin RDIMM slot requirements and population rules
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
Will this 96GB DDR5-6400 RDIMM kit install directly into a Supermicro H14DST-F motherboard?
Yes, the kit is spec-matched for the Supermicro H14DST-F and uses the 288-pin Registered DDR5 form factor that board requires.
Can I mix these 1Rx8 CL52 registered modules with existing RDIMMs of different rank or speed?
Mixing ranks or speeds is not recommended; the board's memory controller expects uniform 1Rx8 CL52 modules at 1.1V for stable full-capacity operation.
How do I confirm the system recognises all 96GB at DDR5-6400 with ECC active?
Check the BIOS memory information screen — it should show 96GB total, 6400 MT/s data rate, and ECC enabled for each populated slot.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00095972BTC
En stock