BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277977BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 192GB 12x16GB 6400MHz CL52 1.1V ECC RDIMM Supermicro H14DSG-OD memory upgrade
192 GB DDR5 ECC registered memory kit with twelve 16 GB modules running at 6400 MHz CL52, validated for Supermicro H14DSG-OD servers
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from twelve 16 GB modules for dense server workloads
- DDR5-6400 speed with CL52 latency delivers rated throughput on supported platforms
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 10 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor verified for the Supermicro H14DSG-OD motherboard
Supermicro H14DSG-OD DDR5 192GB ECC RDIMM Kit
This 192GB kit contains twelve 16GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14DSG-OD motherboard. Each module runs at 1.1V with CL52 latency and a 1Rx8 organization. The registered design buffers address and command signals so all twelve slots can be populated at the rated speed.
Suited for H14DSG-OD memory expansion.
Administrators expanding a Supermicro H14DSG-OD server to its full 192GB capacity with matched, registered ECC modules will find the correct form factor and timing here. Builders needing unbuffered UDIMMs, SODIMMs, or non-ECC memory for workstations or consumer boards cannot use this kit.
288-pin DDR5 RDIMM form factor decides fit
The modules use the 288-pin DDR5 RDIMM connector required by the H14DSG-OD. A UDIMM or SODIMM will not seat in these slots, and a different pin count or DDR generation will prevent the system from posting.
Puntos fuertes
- 192 GB total capacity from twelve 16 GB modules for dense server workloads
- DDR5-6400 speed with CL52 latency delivers rated throughput on supported platforms
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 10 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor verified for the Supermicro H14DSG-OD motherboard
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
How do I install the 12 DDR5 288-pin RDIMM modules into the Supermicro H14DSG-OD, and which population step is commonly missed?
Populate all 12 slots following the motherboard manual's exact DIMM population order; the step most often missed is verifying the required sequence for full 192GB capacity before powering on.
What maintenance or replacement will the 1Rx8 ECC Registered DDR5 kit need during its service life?
The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement only occurs if a module fails, which is covered by the lifetime replacement warranty.
What is the first limit that appears when the 192GB DDR5-6400 CL52 kit runs sustained workloads?
The registered buffer and ECC logic maintain stability at the rated 6400 MT/s and CL52 latency, so the first limit encountered is the memory controller's maximum supported capacity and population rules.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280563BTC
En stock
