BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276429BTC
En stock
NEMIX RAM
NEMIX RAM DDR5 256GB (4x64GB) 6400MHz CL52 1.1V ECC RDIMM Supermicro H13SVW-N
A 256GB DDR5 ECC RDIMM kit of four 64GB modules running at 6400MHz CL52 1.1V, verified for the Supermicro H13SVW-N motherboard
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB capacity in a 4 × 64 GB kit for full server memory population
- DDR5 6400 MHz speed with CL52 latency for rated performance
- 10 V registered ECC RDIMM architecture for stable multi-slot operation
- 2Rx4 dual-rank organization matches motherboard memory-controller expectations
- Validated compatibility with Supermicro H13SVW-N motherboard for exact-fit upgrade
Exact-match server memory kit
This NEMIX RAM kit delivers 256GB of DDR5 capacity across four 64GB registered ECC RDIMMs. It is built for the Supermicro H13SVW-N motherboard and runs at 6400MHz with CL52 latency at 1.1V. The 2Rx4 organisation matches the board's memory-controller expectations so the full capacity is recognised at rated speed.
Verified fitment for Supermicro H13SVW-N
The 288-pin registered form factor is the only type this motherboard accepts; UDIMMs or SODIMMs will not work. Population rules for the H13SVW-N require specific slot ordering, so consult the system manual before installation. Registered buffering offloads the memory controller, allowing every slot to run fully populated without down-clocking.
Suited for production servers needing ECC integrity
ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Buyers who need unbuffered UDIMMs, lower capacities, or non-ECC modules for consumer platforms should look elsewhere.
Puntos fuertes
- 256 GB capacity in a 4 × 64 GB kit for full server memory population
- DDR5 6400 MHz speed with CL52 latency for rated performance
- 10 V registered ECC RDIMM architecture for stable multi-slot operation
- 2Rx4 dual-rank organization matches motherboard memory-controller expectations
- Validated compatibility with Supermicro H13SVW-N motherboard for exact-fit upgrade
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Preguntas sobre este artículo
Does this kit use the 288-pin RDIMM form factor required by the Supermicro H13SVW-N motherboard?
Yes, each module is a 288-pin DDR5 RDIMM, matching the registered DIMM slots on the Supermicro H13SVW-N motherboard.
What is the correct installation order for the four 64 GB modules on the Supermicro H13SVW-N?
Install the modules in the sequence specified by the motherboard manual; the board's population rules determine which slots must be filled first for full 256 GB operation.
Will the Samsung, Micron or Hynix DRAM chips on these modules require any firmware updates or periodic replacement?
No, the DRAM chips are standard components that operate without firmware updates and do not have a scheduled replacement interval under normal server use.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00279001BTC
En stock
