Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Twelve bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 1.1TB 12x96GB ECC RDIMM CL40 2Rx4 memory upgrade

SKU CH-QCDA-KGB57

A 1.1TB DDR5 server memory kit with twelve 96GB ECC registered RDIMMs running at 4800MHz CL40 for the GIGABYTE MA34-CP0 motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Ver 6 configuraciones más
  • Massive 1.1TB capacity from 12 × 96GB modules for dense server workloads
  • DDR5 4800 speed with CL40 timing delivers rated bandwidth for compatible platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10V operation at 2Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor verified for GIGABYTE MA34-CP0 motherboard compatibility

Capacity & purpose

This 1.1TB kit contains twelve 96GB DDR5-4800 registered ECC RDIMMs built for the GIGABYTE MA34-CP0 motherboard. It targets administrators expanding memory capacity on that specific platform where full population and error correction are required.

Thermals & power

Modules operate at the standard DDR5 voltage of 1.10V without heat spreaders, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are filled, helping maintain stable operation at the rated PC5-38400 speed.

Build & connectivity

Each 288-pin RDIMM uses a 2Rx4 organisation with major-brand DRAM chips and no thermal spreader, so clearance depends entirely on the motherboard slot spacing. The registered ECC design ensures single-bit errors are corrected on the fly, preventing silent data corruption in production workloads.

Puntos fuertes

  • Massive 1.1TB capacity from 12 × 96GB modules for dense server workloads
  • DDR5 4800 speed with CL40 timing delivers rated bandwidth for compatible platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10V operation at 2Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor verified for GIGABYTE MA34-CP0 motherboard compatibility

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How do I install the 12 DDR5 288-pin RDIMM modules in the GIGABYTE MA34-CP0 and what step is commonly missed?

Power down and unplug the server, then open the chassis. Insert each 96 GB module into the slots in the exact population order shown in the motherboard manual, pressing until both latches click. The step most often missed is verifying the required DIMM sequence for all 12 slots before booting.

What maintenance or replacement will the 1.1 TB DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required. If a single-bit error exceeds ECC correction or a module fails, replace the faulty 96 GB RDIMM with an identical DDR5 4800 CL40 2Rx4 registered part to keep the 12-module configuration matched.

What limit appears first when the 12 x 96 GB DDR5 4800 kit runs sustained workloads on the MA34-CP0?

The registered DDR5 4800 modules operate at 1.10 V with CL40 latency. Under continuous full-population load the first limit is the memory controller's thermal and signal-integrity ceiling at the rated 4800 MT/s speed, which can throttle bandwidth before the 1.1 TB capacity is exhausted.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.