Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Six green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 4800 192GB 6x32GB ECC RDIMM CL40 1.1V Supermicro H14SST-G memory upgrade

SKU CH-M7BJ-6QRM7

A 192 GB DDR5 ECC registered kit of six 32 GB modules running at 4800 MHz CL40 1.1 V for the Supermicro H14SST-G motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Ver 30 configuraciones más
  • 192 GB total capacity from six 32 GB modules for large workloads
  • DDR5-4800 speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 10 V operation matches the Supermicro H14SST-G memory controller spec
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match DDR5 upgrade for Supermicro H14SST-G

This 192GB kit contains six 32GB DDR5 4800 RDIMM modules built to the precise 2Rx8 registered ECC specification the motherboard expects. Each module runs at 1.10V with CL40 timing so the memory controller recognises the full capacity at rated speed without manual tuning.

Straightforward installation if the manual is

The 288-pin registered form factor fits only the correct DIMM slots on the H14SST-G; UDIMM or SODIMM modules will not seat. Population order matters — consult the board manual for the approved sequence before inserting all six modules to avoid a no-post condition.

Suited for administrators maximising a single

Buyers who need registered ECC stability with every slot populated at full capacity will benefit. Those requiring a different total capacity, a different speed grade, or modules for another motherboard model should select a kit matched to that specific platform.

Puntos fuertes

  • 192 GB total capacity from six 32 GB modules for large workloads
  • DDR5-4800 speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 10 V operation matches the Supermicro H14SST-G memory controller spec
  • 288-pin RDIMM form factor fits the board's required slot type

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How do I verify the 192GB kit runs at DDR5 4800 CL40 1.1V after installing it in my Supermicro H14SST-G?

Enter the BIOS and confirm each of the six slots shows a 32GB DDR5-4800 Registered ECC module at 1.10V with CL40 timings; the server should POST with the full 192GB reported and no memory errors logged.

What does the MR38400-328K6 kit include and is anything else required for installation?

The box contains six 32GB 288-pin DDR5 RDIMMs for a total of 192GB; no extra cables, brackets or software are needed, just follow the motherboard's DIMM population order in its manual.

Should I choose this 6x32GB CL40 kit or a different capacity for the H14SST-G?

Select this 192GB kit when your workload needs maximum registered ECC capacity at the board's native DDR5-4800 speed; choose a smaller kit only if your application does not require the full 192GB.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.