Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Sixteen green DDR5 RDIMM modules with black chips in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 1TB 16x64GB CL40 1.1V 2Rx4 Supermicro H14DSG-OD memory upgrade

SKU CH-G76C-9HX79

A 1 TB DDR5 server memory kit with sixteen 64 GB registered ECC modules running at 4800 MHz, CL40 and 1.1 V for the Supermicro H14DSG-OD motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

Ver 30 configuraciones más
  • 1TB capacity with 16 modules of 64GB each for maximum server memory density
  • DDR5 4800 speed with CL40 latency at 1.1V for rated performance
  • Registered ECC architecture corrects single-bit errors and supports full population
  • 288-pin RDIMM form factor matches Supermicro H14DSG-OD motherboard requirements
  • 2Rx4 rank organization aligns with memory controller expectations for stable operation

System-Specific DDR5 ECC RDIMM Kit

This NEMIX RAM kit delivers a 1TB memory upgrade built from sixteen 64GB DDR5 4800 registered ECC modules. It is designed for administrators and integrators who need to maximise the supported capacity of a Supermicro H14DSG-OD motherboard. The registered architecture allows every slot to run fully populated at rated speed.

2Rx4 Rank and 1.1V Voltage Match

The single specification that determines fitment is the 2Rx4 organisation combined with a 1.10V operating voltage. The Supermicro H14DSG-OD memory controller expects this exact rank structure and voltage; modules with a different rank or voltage will not be recognised at full capacity or at the rated DDR5 4800 speed.

288-Pin RDIMM Form Factor and Population Rules

These 288-pin RDIMMs install directly into the board's DDR5 DIMM slots and require no UDIMM or SODIMM adapters. The kit frees you from mixing capacities or ranks across channels, but you must still consult the motherboard manual for the approved population order and maximum supported capacity per processor before installation.

Puntos fuertes

  • 1TB capacity with 16 modules of 64GB each for maximum server memory density
  • DDR5 4800 speed with CL40 latency at 1.1V for rated performance
  • Registered ECC architecture corrects single-bit errors and supports full population
  • 288-pin RDIMM form factor matches Supermicro H14DSG-OD motherboard requirements
  • 2Rx4 rank organization aligns with memory controller expectations for stable operation

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What does the CL40 latency mean once this kit is installed in a Supermicro H14DSG-OD server?

CL40 is the CAS latency timing the memory controller uses at DDR5-4800; the kit runs at that rated timing when the board populates all slots per its population rules.

How does the 288-pin RDIMM interface limit speed or capacity on this motherboard?

The 288-pin Registered DDR5 form factor is what the H14DSG-OD requires; it supports the kit's full 1 TB capacity and 4800 MT/s speed when installed in the correct slot order.

What physical space and power does the 16-module kit need to fit in the chassis?

Sixteen 288-pin RDIMMs occupy every DIMM slot on the board and each module draws 1.1 V; verify your chassis has clearance for full-height modules and the PSU can supply the combined load.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.