Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 32GB (2x16GB) CL46 1.1V ECC RDIMM for Supermicro H13SSL-NT

SKU CH-R0JG-MY3EA

A 32 GB (2×16 GB) DDR5-5600 registered ECC RDIMM kit at 1.1 V CL46, validated for the Supermicro H13SSL-NT motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Ver 24 configuraciones más
  • 32 GB kit in two 16 GB modules for full-capacity DDR5 5600 performance
  • 1 V CL46 timing matches server memory-controller spec for stable rated speed
  • Registered ECC RDIMM corrects single-bit errors and offloads the controller in dense configs
  • 288-pin 1Rx8 form factor verified for Supermicro H13SSL-NT motherboard slots
  • Major OEM Samsung Micron Hynix DRAM chips deliver enterprise-grade reliability

Exact DDR5 5600 ECC RDIMM kit for Supermicro

This 32 GB (2 x 16 GB) registered ECC DDR5-5600 kit is built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. It targets administrators who need guaranteed full-capacity recognition at rated speed without manual tuning.

Fits 288-pin RDIMM slots

The registered architecture buffers each command so every populated slot runs at the full 32 GB capacity, while on-die ECC corrects single-bit errors before they reach production workloads. Buyers using UDIMM-only boards or consumer platforms cannot use this kit.

Sustains CL46 at 1.10 V under continuous server

Enterprise binning keeps latency and voltage stable during extended compute runs, avoiding the throttling or correction storms that appear in short benchmarks only. Systems requiring higher frequencies, lower latencies or non-ECC operation will not be served by this module.

Puntos fuertes

  • 32 GB kit in two 16 GB modules for full-capacity DDR5 5600 performance
  • 1 V CL46 timing matches server memory-controller spec for stable rated speed
  • Registered ECC RDIMM corrects single-bit errors and offloads the controller in dense configs
  • 288-pin 1Rx8 form factor verified for Supermicro H13SSL-NT motherboard slots
  • Major OEM Samsung Micron Hynix DRAM chips deliver enterprise-grade reliability

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the CL46 latency hold steady under continuous server workloads?

The modules are rated at CL46 and 1.10V, and the registered design keeps timing stable across all populated slots during sustained operation.

How much heat and power will two 16 GB sticks add to a fully loaded chassis?

Each DIMM runs at 1.10 V without a heat spreader; registered buffering reduces electrical load on the memory controller, helping keep thermals predictable in dense configurations.

Does the Supermicro H13SSL-NT need any specific BIOS setting or population order for this 288-pin RDIMM kit?

The board requires 288-pin registered DDR5 DIMMs; consult the motherboard manual for approved slot population sequence and any BIOS updates before installing the 2×16 GB kit.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.