Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 6400 512GB 4x128GB CL52 1.1V ECC RDIMM Supermicro X14SDW-64C-SP9F memory upgrade

SKU CH-WV0Q-BSSZM

512 GB DDR5-6400 registered ECC kit with four 128 GB modules at CL52 and 1.1 V, validated for the Supermicro X14SDW-64C-SP9F motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

Ver 4 configuraciones más
  • 512 GB total capacity from four 128 GB modules for large-scale server workloads
  • DDR5 6400 speed rated at PC5-51200 for high-bandwidth data processing
  • CL52 latency at 1.1 V voltage for efficient registered ECC operation
  • 4Rx4 registered RDIMM architecture enables full-population stability on 288-pin slots
  • Verified compatibility with Supermicro X14SDW-64C-SP9F motherboard memory requirements

Exact-match DDR5 server upgrade

This 512GB kit contains four 128GB DDR5-6400 RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDW-64C-SP9F expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It is designed for administrators who need maximum supported capacity in that specific platform.

Capacity and headroom

Four 128GB 4Rx4 modules deliver 512GB total at 1.1V with CL52 latency, filling the board's DDR5 slots to their rated limit. The registered buffer offloads the memory controller so the full configuration remains stable under sustained server workloads. Builders requiring more memory than this kit provides must consult the motherboard manual for larger supported configurations.

DDR5 interface limits

The 288-pin RDIMM form factor fits only DDR5 registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Population rules and maximum supported capacities vary by motherboard revision and BIOS version, so the system manual must be checked before installation. Mixing these modules with different ranks, voltages or speeds can prevent the server from posting at the rated 6400 MT/s.

Puntos fuertes

  • 512 GB total capacity from four 128 GB modules for large-scale server workloads
  • DDR5 6400 speed rated at PC5-51200 for high-bandwidth data processing
  • CL52 latency at 1.1 V voltage for efficient registered ECC operation
  • 4Rx4 registered RDIMM architecture enables full-population stability on 288-pin slots
  • Verified compatibility with Supermicro X14SDW-64C-SP9F motherboard memory requirements

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the 4Rx4 1.1V DDR5 RDIMMs work with existing DDR5 modules already installed in my Supermicro X14SDW-64C-SP9F?

Mixing ranks or voltages is not recommended; the board's memory controller expects identical 4Rx4 1.1V DDR5-6400 RDIMMs in every populated slot to run at the rated 6400 MT/s without down-clocking or instability.

How can I confirm the kit is running at DDR5-6400 CL52 with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to verify each DIMM reports 6400 MT/s, CL52 latency, 1.1 V, Registered ECC mode, and that the total 512 GB is recognised without errors.

Does the 512 GB kit include only the four 128 GB RDIMMs, or are any cables, brackets or licences supplied?

The package contains exactly the four 128 GB 288-pin DDR5-6400 CL52 1.1 V ECC Registered RDIMMs; no cables, brackets, heatsinks or software licences are included.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.