Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 192GB 12x16GB 4800 CL40 1.1V 1Rx8 288-pin Registered Kit Supermicro H13SSW

SKU CH-AA7N-CVTP2

A 192 GB DDR5 ECC registered kit of twelve 16 GB modules at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H13SSW motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 12X16GB

Ver 24 configuraciones más
  • 192 GB total capacity from twelve 16 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth out of the box
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the platform voltage for reliable POST and sustained performance
  • Verified fit for the Supermicro H13SSW motherboard with 288-pin RDIMM form factor

Exact-match DDR5 ECC RDIMM kit for Supermicro H13SSW

This 192GB kit contains twelve 16GB DDR5-4800 RDIMM modules rated at CL40 and 1.1V. Each module uses a 1Rx8 registered ECC design that matches the memory controller expectations of the Supermicro H13SSW motherboard. The precise rank, voltage, and timing allow the system to recognise the full capacity and run at the rated speed without manual adjustment.

Registered architecture and 288-pin form factor

Registered buffering offloads the memory controller so every slot can be fully populated at full capacity while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor is the only type the H13SSW accepts; UDIMM or SODIMM modules will not fit or function. Modules ship without heat spreaders, relying on server chassis airflow for cooling.

Verify population rules

Server memory support varies by model and BIOS revision. Consult the Supermicro H13SSW manual for approved DIMM population order, maximum supported capacity per channel, and installation steps. This kit is not suitable for platforms that require unbuffered UDIMM modules or non-ECC memory.

Puntos fuertes

  • 192 GB total capacity from twelve 16 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth out of the box
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the platform voltage for reliable POST and sustained performance
  • Verified fit for the Supermicro H13SSW motherboard with 288-pin RDIMM form factor

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does DDR5 4800 CL40 limit the Supermicro H13SSW to 4800 MT/s?

The kit is rated at DDR5 4800 (PC5-38400) with CL40 latency. The Supermicro H13SSW memory controller will run these registered ECC modules at up to 4800 MT/s when populated according to the board's population rules.

Will 12 modules of 288-pin RDIMM fit the Supermicro H13SSW slots?

The kit contains twelve 288-pin DDR5 RDIMMs. The H13SSW requires registered DIMMs in its 288-pin DDR5 slots; verify the exact slot count and population order in the motherboard manual before installing all twelve modules.

What is the correct installation order for 12x16GB RDIMMs on the H13SSW?

Consult the Supermicro H13SSW manual for the approved DIMM population sequence. A common mistake is filling slots sequentially from CPU1 instead of following the board's specific channel-interleaving order, which can prevent the system from recognising the full 192 GB capacity.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.