Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Eight green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM MR44800-618K8 128GB 8x16GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DSG-OD memory upgrade

SKU CH-Y6NT-APRWG

A 128 GB DDR5 ECC RDIMM kit of eight 16 GB modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H14DSG-OD motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Ver 30 configuraciones más
  • Exact 128 GB (8×16 GB) DDR5-5600 kit matches the Supermicro H14DSG-OD memory controller for full-capacity operation
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors to prevent silent data corruption
  • 1Rx8 organisation at 1.1 V CL46 delivers the precise rank, voltage and timing the board expects
  • 288-pin RDIMM form factor is the only module type the H14DSG-OD accepts — no UDIMM or SODIMM fit
  • Lifetime replacement warranty with free US-based technical support backs every module in the kit

Exact-match DDR5-5600 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5-5600 Registered ECC RDIMMs built to the precise 1Rx8 rank, 1.1V voltage and CL46 timing the Supermicro H14DSG-OD memory controller expects. The 288-pin modules install directly into the server board without adapters.

Suited for full-population server upgrades

It fits administrators populating every DIMM slot on a compatible Supermicro H14DSG-OD platform who need registered ECC stability at the board's rated 5600 MT/s speed. Builders using unbuffered UDIMMs, SODIMM form factors, or non-ECC memory should look elsewhere because those types will not be recognised by this registered-DIMM-only controller.

Straightforward slot-in installation

Align the 288-pin edge connector with the keyed RDIMM socket and press until the retention clips lock; no tools or firmware flashes are required. The most common issue is ignoring the motherboard manual's population order, which can leave capacity unrecognised or force the system to run at a lower speed.

Puntos fuertes

  • Exact 128 GB (8×16 GB) DDR5-5600 kit matches the Supermicro H14DSG-OD memory controller for full-capacity operation
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors to prevent silent data corruption
  • 1Rx8 organisation at 1.1 V CL46 delivers the precise rank, voltage and timing the board expects
  • 288-pin RDIMM form factor is the only module type the H14DSG-OD accepts — no UDIMM or SODIMM fit
  • Lifetime replacement warranty with free US-based technical support backs every module in the kit

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What motherboard must I already have for this 128GB DDR5 5600 kit to be recognized at full capacity?

The kit is spec-matched for the Supermicro H14DSG-OD motherboard and its 288-pin RDIMM slots, so the board will recognize all 128GB at the rated 5600 speed.

Can I keep any existing DDR5 RDIMMs in the H14DSG-OD while adding this 8x16GB CL46 kit?

The board's memory-population rules decide whether mixed ranks or speeds are allowed; consult the motherboard manual for the approved DIMM order before mixing modules.

How do I confirm the kit is running at DDR5 5600 with CL46 and ECC active after installation?

Enter the BIOS or use a tool like dmidecode to verify the reported speed is 5600 MT/s, CAS latency is 46, voltage reads 1.1V, and ECC status shows enabled.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.