Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OEM Industries
Blower-style cooler for select NEC laptops, running at 5 V and 0.40 W with a three-pin connector
This 5 V blower fan is built as a direct drop-in cooler for NEC VA80J, AV93J, VA73H, VA65H and 60H laptops. It draws 0.40 W and connects through a standard three-pin header, so the system can monitor speed without extra wiring. The two-tone housing matches the original aesthetic while keeping the assembly light.
When the original Sunon unit becomes noisy, spins down or fails completely, this model restores the factory airflow path without modification. The upgrade is worth it once thermals throttle the CPU or the bearing whine becomes audible, because the pinout and voltage match the board exactly. No soldering or adapter cables are required for the swap.
The blower comfortably handles the thermal load designed for the VA80J, AV93J, VA73H, VA65H and 60H platforms, delivering the specified 0.40 W of cooling power. It runs out of headroom in any larger chassis or higher-wattage configuration, and the three-pin connector will not fit proprietary four-pin or PWM-only headers found on other brands.
| Model | GB0535AEV2-8 |
|---|---|
| Color | 2-Tone |
| Type | Fan only |
| Power Connector | 3 Pin |
| LED | No |
The fan is listed for NEC VA80J, AV93J, VA73H, VA65H and 60H models; check your service manual to confirm the exact mounting points before ordering.
Remove the old fan, align the blower outlet with the heatsink duct, plug the 3-pin connector into the motherboard header, and secure the screws — the step often missed is routing the wires clear of the impeller.
Replace it when bearing noise increases, airflow drops noticeably, or the 5V 0.40W motor fails to spin up at boot.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?